Generated by All in One SEO Pro v4.9.3, this is an llms.txt file, used by LLMs to index the site.

# Engine Performance Expo

The Premiere Event in Engine Performance

## Sitemaps

- [XML Sitemap](https://engineperformanceexpo.com/sitemap.xml): Contains all public & indexable URLs for this website.

## Posts

- [News & Events](https://engineperformanceexpo.com/news-events/)
- [Expo 2023 - Episode 49 – Product Sneak Peek: VEPR Small Block Package “Mayhem”](https://engineperformanceexpo.com/mini-series/expo-2023-episode-49-product-sneak-peek-vepr-small-block-package-mayhem/) - Straub Technologies’ Chris Straub and Street Outlaws’ James Goad give a sneak peek at a new low-cost 700HP package for big inch Chevy small block engines
- [Expo 2023 - Episode 48 – Advanced Tech Feature: SUMEbore](https://engineperformanceexpo.com/mini-series/expo-2023-episode-48-advanced-tech-feature-sumebore/) - Lake Speed Jr is joined by Rottler Manufacturing’s Ed Kiebler to talk about plasma spray (aka: SUMEbore) cylinder coatings and what to know about honing them
- [Expo 2023 - Episode 47 – Product Spotlight: Get'M Performance](https://engineperformanceexpo.com/mini-series/expo-2023-episode-47-product-spotlight-getm-performance/) - The guys talk with Trevor from Get’M Performance about why their precision carburetors are the go-to for engine builders with their eye on a $1 million prize
- [Expo 2023 - Episode 46 - Tech 101 Feature: Bearings & Balancing](https://engineperformanceexpo.com/mini-series/expo-2023-episode-46-tech-101-feature-bearings-balancing/) - CWT Industries’ Randy Neal and Mahle’s Dan Begle take us on a deep dive into finding peak performance with rotating assemblies without running to failure.
- [Expo 2023 - Episode 45 - Father & Son Roundtable](https://engineperformanceexpo.com/mini-series/expo-2023-episode-45-father-son-roundtable/) - Joe and Lake sit down with a trio of father and son racing teams to talk about the family business and why the family that races together stays together
- [Expo 2023 - Episode 44 – Advanced Tech Feature:  Cylinder Wear Tests](https://engineperformanceexpo.com/mini-series/expo-2023-episode-44-advanced-tech-feature-cylinder-wear-tests/) - Lake Speed Jr heads down to the Southwest Research Institute to set up some tests to see how cylinder bore finish affects cylinder performance and wear
- [Expo 2021 - Episode 31: Block Sleeving Q&A](https://engineperformanceexpo.com/mini-series/expo-2021-episode-31-block-sleeving-qa/) - Joe Castello is joined by Joe Creason of Creason Racing Engines, and Tim Eichhorn from MPR Racing for an "Ask The Experts" session on block sleeving.
- [Expo 2023 – Episode 55 – Engine Builder Interview: Dennis Borem](https://engineperformanceexpo.com/mini-series/expo-2023-episode-55-engine-builder-interview-dennis-borem/) - Joe Castello and Lake Speed Jr welcome Dennis Borem of PME Engines to talk about the re-build and results of one of Lake’s dad’s 20 year-old Ford C3 Engines
- [Episode 13 - Tech 101: Bore Geometry](https://engineperformanceexpo.com/mini-series/engine-performance-expo-2-day-2-episode-13-tech-101-bore-geometry/) - Ed & Lake head into the shop for a Tech 101 on Bore Geometry and the tools, techniques, and considerations you'll need to hone a cylinder for perfect ring seal.
- [Expo 2021 – Episode 36: Performance Diesel Part 1](https://engineperformanceexpo.com/mini-series/expo-2021-episode-36-performance-diesel-part-1/) - Part 1 of a 2 part series where Cass Choate of Choate Performance Engineering and The Diesel Doctor takes us into building performance diesel engines
- [Expo 2021 - Episode 41: Dyno Testing Best Practices](https://engineperformanceexpo.com/mini-series/expo-2021-episode-41-dyno-testing-best-practices/) - We break down the basics of dyno testing and how to develop a testing framework you can test nearly any type of engine and combination of engine components.
- [Expo 2021 – Episode 42: Dyno Tools & Techniques](https://engineperformanceexpo.com/mini-series/expo-2021-episode-42-dyno-tools-techniques/) - Shaver's "Dyno" Don Mac Askill takes us through the entire process of putting an engine on the dyno, running it through its paces & proper removal procedures
- [Expo 2021 – Episode 25: Engine Testing With the Spintron](https://engineperformanceexpo.com/mini-series/expo-2021-episode-25-engine-testing-with-the-spintron/) - Ben Strader of EFI University goes through the cost savings and advantages you get from engine testing on the Spintron before going to the dyno or the track
- [Advanced Induction System Tuning with Darin Morgan - Part 2](https://engineperformanceexpo.com/mini-series/2025/advanced-induction-system-tuning-with-darin-morgan-part-2/) - Legendary engine builder Darin Morgan reveals the science of high-efficiency ports, airflow secrets, and why old porting methods no longer make power.
- [Beyond Balancing: Why Harmonics Can Destroy Your Engine | Randy Neal (CWT)](https://engineperformanceexpo.com/mini-series/2025/beyond-balancing-why-harmonics-can-destroy-your-engine-randy-neal-cwt/) - In this masterclass from the Engine Performance Expo, Randy Neal, president of CWT Industries, reveals the hidden enemy of horsepower and durability: harmonics.
- [Engine Surface Finish Explained: Why Waviness Matters More Than a Shiny Surface](https://engineperformanceexpo.com/mini-series/2025/engine-surface-finish-explained-why-waviness-matters-more-than-a-shiny-surface/) - Surface finish is more than a number. Metrology expert Mark Malburg explains why a surface's true shape is the key to sealing and peak performance.
- [Performance Engine Secrets: Piston Rings, Honing, and Oil Explained](https://engineperformanceexpo.com/mini-series/performance-engine-secrets-piston-rings-honing-and-oil-explained/) - Learn how piston rings, honing, oil & pistons work together to boost horsepower. Insights from Total Seal & Rottler at Engine Performance Expo 2025.
- [Advanced Induction Systems with Darin Morgan - Part 1](https://engineperformanceexpo.com/mini-series/2025/advanced-induction-systems-with-darin-morgan-part-1/) - Darin Morgan delivers a masterclass in Advanced Induction System Design. In Part 1 we learn why purpose dictates design and yesterday's manifolds are old news.
- [Expo 2023 - Episode 26 – Industry Personality: Joe “Dominator” Woods](https://engineperformanceexpo.com/mini-series/expo-2023-episode-26-industry-personality-joe-dominator-woods/) - Lake and Joe sit down with Joe “Dominator” Woods of Street Outlaws fame to talk about he came to be the model for the “every-man’s” drag racing dreams
- [EPExpo 2025 Live - Teaser Video](https://engineperformanceexpo.com/mini-series/epexpo-2025-live-teaser-video/) - Expo 2025 was July 16-18, 2025. We're still working on the full videos from the presentations. Here's a short teaser for you to enjoy in the meantime!
- [Engine Performance Expo Live! 2025](https://engineperformanceexpo.com/news-events/engine-performance-expo-live-2025/) - The Engine Performance Expo returns in 2025 as an in-person event live from Rottler Mfg HQ in Kent, Washington July 16-18, 2025! Space is limited, register now!
- [Expo 2024 – Episode 39: How Much Power Can You Gain w/o Changing the Camshaft or Cylinder Heads?](https://engineperformanceexpo.com/mini-series/expo-2024-episode-39-how-much-power-can-you-gain-w-o-changing-the-camshaft-or-cylinder-heads/) - How much power can you gain without changing camshafts or cylinder heads? Lake Speed Jr answers that with a 20-year-old Ford C3 engine from his dad’s garage.
- [Expo 2024 – Episode 36: Engine Builder Interview - Darin Morgan](https://engineperformanceexpo.com/mini-series/expo-2024-episode-36-engine-builder-interview-darin-morgan/) - Joe Castello & Lake Speed Jr sit down with Darin Morgan of BES Racing to talk about his storied history in engine building and racing
- [Expo 2024 – Episode 34: Engine Builder Hall of Fame Inductions (Part 2)](https://engineperformanceexpo.com/mini-series/expo-2024-episode-34-engine-builder-hall-of-fame-inductions-part-2/) - The Engine Builder Hall of Fame’s inaugural class of admissions covering the heroes of performance engine builders from the second half of the 20th century.
- [Expo 2024 – Episode 32: Roundtable Discussion - Engine Design vs Engine Development](https://engineperformanceexpo.com/mini-series/expo-2024-episode-32-roundtable-discussion-engine-design-vs-engine-development/) - Our experts sit down to discuss the pros and cons of building an engine from scratch vs developing one based on the rules dictated by a sport’s governing body
- [Expo 2021 – Episode 38: Assembly Tips & Tricks (Part 1)](https://engineperformanceexpo.com/mini-series/expo-2021-episode-38-assembly-tips-tricks-part-1/) - In this episode we re-visit one of our most popular segments – the many amazing tool hacks, tips and tricks of legendary engine builder Jon Kaase
- [Expo 2024 – Episode 29: Balancing with Jimmy Barton](https://engineperformanceexpo.com/mini-series/expo-2024-episode-29-balancing-with-jimmy-barton/) - Randy Neal takes us to Morrisville, North Carolina, home of Jimmy Barton’s Custom Performance Engines to take a deep dive into the do’s and don’ts of balancing.
- [Expo 2024 – Episode 27: In the Shop with Jason Line](https://engineperformanceexpo.com/mini-series/expo-2024-episode-27-in-the-shop-with-jason-line/) - CWT Industries’ Randy Neal heads down to The Tar Heel State to see Pro Stock legend Jason Line and talk to the man about his new JLine engine blocks.
- [Expo 2024 – Episode 23: Roundtable: Let’s Talk Tooling & Fixtures](https://engineperformanceexpo.com/mini-series/expo-2024-episode-23-roundtable-lets-talking-tooling-fixtures/) - We sit down for a roundtable conversation on tooling and fixtures, and eliminating the gap between what we assume is correct and what it actually is correct.
- [Expo 2024 - Episode 41: Closing Roundtable](https://engineperformanceexpo.com/mini-series/expo-2024-episode-41-closing-roundtable/) - Hosts Joe and Lake are joined by Randy Neal, Chris Straub, and Joe “Dominator” Woods for a discussion on the next generation of performance engine builders
- [Expo 2024 – Episode 40: Product Spotlight - Racing Valves](https://engineperformanceexpo.com/mini-series/expo-2024-episode-40-product-spotlight-racing-valves/) - This one's for those of you in the shop. Jesse & Alan from Engine Pro return to the studio for a quick product spotlight on Engine Pro’s line of racing valves.
- [Expo 2024 – Episode 38: Project Pontiac Update](https://engineperformanceexpo.com/mini-series/expo-2024-episode-38-project-pontiac-update/) - Joe Castello & Lake Speed Jr join Jolie Woods (daughter of Joe “Dominator” Woods) for an update on Jolie's progress on the work on Castello's Pontiac block
- [Expo 2024 – Episode 37: Surface Finish After Break-In](https://engineperformanceexpo.com/mini-series/expo-2024-episode-37-surface-finish-after-break-in/) - In this episode we look at how much surface finish changes between a freshly honed block, after engine assembly and finally after its first break-in run.
- [Expo 2024 – Episode 35: Lifter Bore Indexing](https://engineperformanceexpo.com/mini-series/expo-2024-episode-35-lifter-bore-indexing/) - We head down to the shop floor at CNC Blockworks where Embry Harrick and Ryan Thompson from Rottler Mfg walk through the hows and whys of lifter bore indexing
- [Expo 2024 – Episode 33: Camshafts Mods for Boost vs NA](https://engineperformanceexpo.com/mini-series/expo-2024-episode-33-camshafts-mods-for-boost-vs-na/) - For this episode we head back to EFI University for a class on using engine data to make camshaft mods for boosted engines versus naturally aspirated ones
- [Expo 2024 – Episode 31: How to Run a Machine Shop Today](https://engineperformanceexpo.com/mini-series/expo-2024-episode-31-how-to-run-a-machine-shop-today/) - Lake Speed Jr sits down with Straub Technologies’ owner, Chris Straub, to learn why automation is the key to a machine shop’s growth in today’s market.
- [Expo 2024 – Episode 30: Engine Builder Interview: Mark Vieau](https://engineperformanceexpo.com/mini-series/expo-2024-episode-30-engine-builder-interview-mark-vieau/) - Joe Castello & Lake Speed Jr sit down with Mark Vieau of Scott Performance Wire to talk about his storied history in engine building and racing
- [Expo 2024 – Episode 28: Product Spotlight – Timing Components](https://engineperformanceexpo.com/mini-series/expo-2024-episode-28-product-spotlight-timing-components/) - Jesse and Alan from EnginePro deliver a quick segment on their Timing Components product line, from replacement chains to complete gearing & component kits
- [Expo 2024 – Episode 26: How-To: Proper Deck Surface for Modern Gaskets](https://engineperformanceexpo.com/mini-series/expo-2024-episode-26-how-to-proper-deck-surface-for-modern-gaskets/) - Chuck Lynch, Ryan Thompson and Matt Hussey deliver a master class on everything you need to know about deck surfacing for modern MLS head gaskets
- [Expo 2024 – Episode 25: How-To - Finding & Fixing Fuel Dilution via Oil Analysis](https://engineperformanceexpo.com/mini-series/expo-2024-episode-25-how-to-finding-fixing-fuel-dilution-via-oil-analysis/) - This episode is all about how to use oil analysis to ID sources of engine wear and the tips & tricks pros use the info to reduce it and improve performance
- [Expo 2024 – Episode 24: Roundtable: Diesel Discussion](https://engineperformanceexpo.com/mini-series/expo-2024-episode-24-roundtable-diesel-discussion/) - Joe and Lake sit down with a group of diesel experts to discuss the unique challenges of building diesel engines and how they get the best performance from them
- [Expo 2024 – Episode 22: Chevy R07 Line Boring](https://engineperformanceexpo.com/mini-series/expo-2024-episode-22-chevy-r07-line-boring/) - We return to Automotive Specialists Racing Engines to see a NASCAR R07 block line bored on a Rottler F69A. Then it's back in-studio to talk careers in the biz.
- [Expo 2024 – Episode 21: Keith Dorton Automotive Specialists Line Boring Roundtable](https://engineperformanceexpo.com/mini-series/expo-2024-episode-21-keith-dorton-automotive-specialists-line-boring-roundtable/) - In our first of a series on building R07 engines, we hold a roundtable with Keith Dorton & Co. about why bore geometry is so important and how to get it right
- [Expo 2024 – Episode 20: Super Stock Hemi Cylinder Head Porting](https://engineperformanceexpo.com/mini-series/expo-2024-episode-20-super-stock-hemi-cylinder-head-porting/) - BES Racing’s Darin Morgan delivers a deep dive master class on the tools, tips, and tricks of porting and building race-winning Super Stock Hemi engines
- [Expo 2024 - Episode 19: Day 2 Show Open – Lake Speed Sr Back on the Track](https://engineperformanceexpo.com/mini-series/expo-2024-episode-19-day-2-show-open-lake-speed-sr-back-on-the-track/) - Day 2 opens with a re-cap of the progress on Project Pontiac before we jump to the track to see Lake Speed Sr and his newly restored Ford C3 Engine open it up
- [Expo 2024 – Episode 18: Day 1 Closing Roundtable](https://engineperformanceexpo.com/mini-series/expo-2024-episode-18-day-1-closing-roundtable/) - Joe and Lake are joined by Jon Kaase, Keith Dorton, Billy Godbold, and Cass Choate for a roundtable discussion on the big projects they’re working on in 2024
- [Expo 2024 – Episode 17: Ed Morel Interview & Project Pontiac Update](https://engineperformanceexpo.com/mini-series/expo-2024-episode-17-ed-morel-interview-project-pontiac-update/) - We get an update on Joe Castello’s “Project Pontiac” before Joe & Lake head back to the studio for a Hidden Horsepower interview with Ed Morel of Morel Lifters
- [Expo 2024 – Episode 16: Balancing – 3 Things You Should Never Do](https://engineperformanceexpo.com/mini-series/expo-2024-episode-16-balancing-3-things-you-should-never-do/) - We head down to the shop floor where CWT Industries’ Randy Neal reveals three big mistakes you should never make when balancing a crankshaft
- [Expo 2024 – Episode 15 : Engine Builder Hall of Fame (Day 1)](https://engineperformanceexpo.com/mini-series/expo-2024-episode-15-engine-builder-hall-of-fame-day-1/) - The Engine Builder Hall of Fame’s inaugural class of admissions covering the standouts in the first two eras of performance engine builders, Pre and Post WWII
- [Expo 2024 – Episode 14: Software to Make Balancing Easy](https://engineperformanceexpo.com/mini-series/expo-2024-episode-14-software-to-make-balancing-easy/) - Joe and Lake are joined by Randy Neal of CWT Industries for a short segment on using software and tech to take the time and hassle out of balancing crankshafts.
- [Expo 2024 – Episode 13: Choosing Abrasives for the Right Plateau Hone](https://engineperformanceexpo.com/mini-series/expo-2024-episode-13-choosing-abrasives-for-the-right-plateau-hone/) - We head down to the shop floor for a hands-on dive into how to choose and use the right abrasive to get the perfect plateau for your honing work
- [Expo 2024 - Episode 11: Seat & Guide Work with BES Racing Engines](https://engineperformanceexpo.com/mini-series/expo-2024-episode-11-seat-guide-work-with-bes-racing-engines/) - We head to Guilford, IN, home of BES Racing Engines to sit down with Tony Bischoff and Darren Morgan for a deep dive session on seat and guide work.
- [Expo 2024 - Episode 12: Interview with Legend of Pro Stock Mike Valerio](https://engineperformanceexpo.com/mini-series/expo-2024-episode-12-interview-with-legend-of-pro-stock-mike-valerio/) - Expo hosts Joe and Lake sit down with Pro Stock Legend Mike Valerio for a wide-ranging interview on Valerio’s remarkable career and impact on Pro Stock racing
- [Expo 2024 – Episode 10: Surface Finish Whiteboard Session](https://engineperformanceexpo.com/mini-series/expo-2024-episode-10-surface-finish-whiteboard-session/) - Billy Godbold and Digital Metrology's Mark Malburg deliver a masterclass in surface finish and determining the right one for your engine application
- [Expo 2024 – Episode 9: Using a Blow By Meter](https://engineperformanceexpo.com/mini-series/expo-2024-episode-9-using-a-blow-by-meter/) - This is a short segment on why if you load your engine on the dyno for testing you measure engine blow by and see how engine modifications affect performance
- [Expo 2024 – Episode 8: Block Sleeving with Matthew Hussey](https://engineperformanceexpo.com/mini-series/expo-2024-episode-8-block-sleeving-with-matthew-hussey/) - We head down to the shop floor with Rottler's Ryan Thompson and Matthew Hussey from MSH Machine to talk tips & tricks for sleeving the 6.4L Powerstroke diesel.
- [Expo 2024 – Episode 7: Let’s Talk Diesel with Jeremy Wagler & Wagler Competition Products](https://engineperformanceexpo.com/mini-series/expo-2024-episode-7-lets-talk-diesel-with-jeremy-wagler-wagler-competition-products/) - We head out to Odon, IN to see Jeremy Wagler of Wagler Competition Products and talk performance diesel, the advantage of trade school, and owning a drag strip.
- [Expo 2024 – Episode 6: State of the Industry Roundtable – Flat Tappet Camshafts & More](https://engineperformanceexpo.com/mini-series/expo-2024-episode-6-state-of-the-industry-roundtable-flat-tappet-camshafts-more/) - In the 1st roundtable of Expo 2024, our industry experts to answer “why can’t anyone get flat tappet camshafts?” and “why is everything so freaking expensive?”
- [Expo 2024 – Episode 5: Manifold Runner Length Testing](https://engineperformanceexpo.com/mini-series/expo-2024-episode-5-manifold-runner-length-testing/) - We head out to EFI University to see what happens to engine performance when we swap manifold runners of different lengths on a stock Ford Godzilla engine
- [Expo 2024 - Episode 4: Interview with Brian Tooley](https://engineperformanceexpo.com/mini-series/expo-2024-episode-4-interview-with-brian-tooley/) - Joe and Lake sit down with Brian Tooley of Brian Tooley Racing to talk about his start, his success secrets, and advice he has for those new to the business
- [Expo 2024 - Episode 3: Diesel Valvetrain Upgrades](https://engineperformanceexpo.com/mini-series/expo-2024-episode-3-diesel-valvetrain-upgrades/) - We head out to Odon, Indiana to see Jeremy Wagler of Wagler Competition, to talk about improving Cummins diesel stock engine design with aftermarket components
- [Expo 2024 – Episode 2: Hands-on Honing Class](https://engineperformanceexpo.com/mini-series/expo-2024-episode-2-hands-on-honing-class/) - An introduction to the 2024 Hands-on Honing Classes that will walk you through all the “hows” and “whys” of honing, as well as the technology available
- [Expo 2024 – Episode 1: Project Pontiac & Fixing a Scuffed Cylinder](https://engineperformanceexpo.com/mini-series/expo-2024-episode-1-project-pontiac-fixing-a-scuffed-cylinder/) - For the opening segment of Expo 2024 we learn about Joe Castello's "Project Pontiac", then get a hack on fixing a scuffed cylinder with drain opener & a scrubby
- [Expo 2024 - Day 2 Replay](https://engineperformanceexpo.com/mini-series/expo-2024-day-2-replay/) - Binge on Day 2 of the Engine Performance Expo 2024. Timecodes are included so you can skip to your desired segment
- [Expo 2024 - Day 1 Replay](https://engineperformanceexpo.com/mini-series/expo-2024-day-1-replay/) - Binge on Day 1 of the Engine Performance Expo 2024. Timecodes are included so you can skip to your desired segment
- [Expo 2023 - Episode 50 – Tech 101: Oil Level Dyno Test](https://engineperformanceexpo.com/mini-series/engine-performance-expo-2023-episode-50-tech-101-oil-level-dyno-test/) - Lake Speed Jr joins Ben Strader at EFI University to load our Expo LS engine on the dyno and test what the best oil level is for maximum horsepower production.
- [Expo 2024 On-Site Guest Information](https://engineperformanceexpo.com/news-events/expo-2024-on-site-guest-information/) - Expo 2024 is just hours away! If you're attending the event in person, please take a moment to review this information
- [Watch the Inaugural Engine Builder Hall of Fame Induction Ceremony Live](https://engineperformanceexpo.com/news-events/watch-the-inaugural-engine-builder-hall-of-fame-induction-ceremony-live/) - On Thursday, January 11th, 2024 at 3PM eastern the first two classes of inductees will be admitted to the Engine Builder Hall of Fame live from Expo 2024
- [Episode 12 - Industry Careers Roundtable](https://engineperformanceexpo.com/mini-series/episode-12-day-1-closing-roundtable/) - In day 1's last segment Joe and Lake sit down for a roundtable on careers in the industry with Scooter Brothers, John Callies, Warren Johnson, and Jon Kaase.
- [Episode 11 - Engine Builder Interview : Warren Johnson](https://engineperformanceexpo.com/mini-series/episode-11-engine-builder-interview-warren-johnson/) - In this episode Lake and Joe sit down with the Professor of Pro Stock, Warren Johnson to talk about his career in racing and his new best-selling biography.
- [Episode 14 - Balancing](https://engineperformanceexpo.com/mini-series/engine-performance-expo-2-day-2-episode-14-balancing/) - In pursuit of 1,000 HP for his engine, Lake Speed Jr heads down to Georgia to learn from CWT Industries' Randy Neal the whys and hows of perfect balancing.
- [Episode 15 – Engine Builder Interview : Scooter Brothers](https://engineperformanceexpo.com/mini-series/episode-15-engine-builder-interview-scooter-brothers/) - Lake and Joe sit down with SEMA Hall of Famer Scooter Brothers to talk about his incredible impact on the racing industry both on the tack and in business.
- [Episode 16 - Advanced Tech Feature: 3D Printing and Digitizing Parts](https://engineperformanceexpo.com/mini-series/episode-16-advanced-tech-feature-3d-printing-and-digitizing-parts/) - Lake and Joe talk with Charles Navarro of LN Engineering about 3D printing for prototyping and making engine parts. Ed Isky gets a lifetime achievement award.
- [Episode 17 - Time is Money: Putting Tech and Automation to Work in the Shop](https://engineperformanceexpo.com/mini-series/episode-17-time-is-money-putting-tech-and-automation-to-work-in-the-shop/) - Lake Speed Jr talks with Chris Straub of Straub Technologies about using tech and automation to make your shop more efficient and profitable with fewer staff
- [Episode 18 - V-Twin Engines with George Bryce](https://engineperformanceexpo.com/mini-series/episode-18-v-twin-engines-with-george-bryce/) - In this episode we put the eight cylinders aside and head down to visit motorcycle drag racing legend George Bryce and talk about building winning V-Twins.
- [Episode 19 - Engine Builder Interview: George Bryce](https://engineperformanceexpo.com/mini-series/season2/episode-19-engine-builder-interview-george-bryce/) - Joe Castello and Lake Speed Junior interview legendary Pro Stock Engine Builder, George Bryce of Star Racing.
- [Episode 20: Tech 101 - Welding](https://engineperformanceexpo.com/mini-series/episode-20-tech-101-welding/) - We head on over to Tim Wilkerson's Capitol City Machine Shop for an in-depth lesson in repairing & welding an aluminum top fuel block to race-ready condition.
- [Episode 21 - Tech 101: Engine Bearings](https://engineperformanceexpo.com/mini-series/episode-21-tech-101-engine-bearings/) - In this segment Lake Speed Jr heads on over to Petty’s Garage in to take a deep dive into everything you need to know about bearings with Mahle’s Dan Begle
- [Episode 22 - Diesel of the Day: Powerstroke](https://engineperformanceexpo.com/mini-series/episode-22-diesel-of-the-day-powerstroke/) - Lake Speed Jr heads over to Bolivar, TN to see the Diesel Doctor, Cass Choate of Choate Performance Engineering, where they dive into Powerstroke diesels
- [Episode 23 - Parts Supply Rountable Discussion](https://engineperformanceexpo.com/mini-series/episode-23-parts-supply-rountable-discussion/) - Industry experts discuss the shift away from just in time inventory and strategies they’re using to limit the effects of inflation and employee shortages.
- [Episode 24 - AERA & Educational Resources](https://engineperformanceexpo.com/mini-series/episode-24-aera-educational-resources/) - Lake visits Steve Fox & Chuck Lynch of the AERA to learn about the many career and educational resources available from the Engine Builders Association.
- [Episode 25 - Engine Builder Interview: Tim Wilkerson](https://engineperformanceexpo.com/mini-series/episode-24-engine-builder-interview-tim-wilkerson/) - A joint broadcast with the Hidden Horsepower podcast, Joe and Lake sit down for a fun and enlightening interview with NHRA nitro funny car racer Tim Wilkerson
- [Episode 26 - Day 2 Closing Roundtable](https://engineperformanceexpo.com/mini-series/episode-26-day-2-closing-roundtable/) - In the closing episode of Day 2 of the Engine Performance Expo, Joe and Lake host a roundtable with George Bryce, Charles Navarro, Randy Neal, and Tim Wilkerson
- [Episode 7 - How Speeds, Feeds & Lube Affect Surface Finish](https://engineperformanceexpo.com/mini-series/episode-7-how-speeds-feeds-lube-affect-surface-finish/) - Lake and Ed site down with Don Miller and dive into speeds, feeds and lube and getting that perfect grind every time. Part 1 of a 2 part can't miss episode.
- [Episode 10 - Fulltime Schooling and a Career in Engine Building](https://engineperformanceexpo.com/mini-series/episode-10-fulltime-schooling-and-a-career-in-engine-building/) - In this episode, we look at careers in engine building, heading down to Houston to learn why "if you can put chips on the ground, you'll always have a career."
- [Episode 9 - Block Work](https://engineperformanceexpo.com/mini-series/episode-9-block-work/) - The guys head over to CNC Blockworks to go through the steps and best practices in prepping and machining an iron LS block to build their boosted engine.
- [Episode 8 - REM Finishing and Diesel of the Day with SoCal Diesel](https://engineperformanceexpo.com/mini-series/episode-8-rem-finishing-and-diesel-of-the-day-with-socal-diesel/) - We go inside REM finishing with Shaver Racing's "Dyno" Don MacAskill, then head on over to SoCal Diesel to talk Duramax Diesel performance
- [Episode 7 - How Speeds, Feeds & Lube Affect Surface Finish (Pt 2)](https://engineperformanceexpo.com/mini-series/episode-7-how-speeds-feeds-lube-affect-surface-finish-pt-2/) - Three of the industry's leading experts dive into the tools, tips and techniques they and their customers use to get the ideal finish and engine performance
- [Episode 6 : Engine Builder Interview - Roy Johnson](https://engineperformanceexpo.com/mini-series/episode-6-engine-builder-interview-roy-johnson/) - Lake and Joe sit down with drag racing hall-of-famer Roy Johnson of for a wide ranging talk about his experiences and his "30-year overnight success."
- [Episode 5 - Business Opportunities : Profit is Not a Dirty Word](https://engineperformanceexpo.com/mini-series/episode-5-business-opportunities-profit-is-not-a-dirty-word/) - Lake Speed Jr sits down with Chris Straub of Straub Technologies to talk about the secrets to running a successful shop in the engine building industry
- [Expo 2 - Episode 1 – Get Boosted! How to get 1,000HP from a stock stroke](https://engineperformanceexpo.com/mini-series/episode-1-get-boosted-how-to-get-1000hp-from-a-stock-stroke/) - In the season 2 Expo opener, we go to EFI University to see Professor Ben Strader for a tutorial the calculations you need to get 1,000HP from a stock stroke
- [Episode 2 – Align Boring vs Align Honing](https://engineperformanceexpo.com/mini-series/episode-2-align-boring-vs-align-honing/) - We dive deep into Align boring and honing do's, don't, theories, tips and trade-offs with live demos and Q&A from Rottler's Ed Kiebler and AERA's Chuck Lynch
- [Episode 4 - Advance Tech Feature : Anatomy of a Hydraulic Roller Lifter](https://engineperformanceexpo.com/mini-series/episode-4-advance-tech-feature-anatomy-of-a-hydraulic-roller-lifter/) - In Expo2 episode 4, engine building legend John Callies gives us an advanced course in the anatomy of hydraulic roller lifters and advantages vs flat tappet
- [Best of Expo 1: Jon Kaase's DIY split nut tool](https://engineperformanceexpo.com/mini-series/best-of/best-of-expo-1-jon-kaases-diy-split-nut-tool/) - Jon Kaase shares an inexpensive DIY Vice Grip tool hack he uses everyday to remove and set nuts without damaging thread.
- [Expo 2021 – Episode 1: Block Selection & Machining Considerations](https://engineperformanceexpo.com/mini-series/expo-2021-episode-1-block-selection-machining-considerations/) - Revisiting our first Expo in 2021, we head to Dart Machinery to select our engine block for our featured engine build, then it's back in studio for live Q&A
- [Expo 2021 – Episode 44: Closing Roundtable](https://engineperformanceexpo.com/mini-series/expo-2021-episode-44-closing-roundtable/) - In the last segment from Expo 2021 Lake and Joe sat down with our experts for a roundtable wrap-up of what we learned, then give away the Expo LS short block
- [Attend Expo 2024 In Person!](https://engineperformanceexpo.com/news-events/attend-expo-2024-in-person/) - Be part of the live Engine Performance Expo action! Register now to attend in person, broadcast live from our studios at Straub Technologies in Piney Flats, TN!
- [Expo 2021 – Episode 43: Dyno Testing Q&A](https://engineperformanceexpo.com/mini-series/expo-2021-episode-43-dyno-testing-qa/) - We conclude our 3-part deep dive on dyno with an in-studio Q&A session with "Dyno" Don Mac Askill on anything & everything you'd want to know about dyno testing
- [Engine Performance Expo Returns for 2024](https://engineperformanceexpo.com/news-events/engine-performance-expo-returns-for-2024/) - Engine Performance Expo returns January 11 & 12, 2024! 40 educational sessions , demonstrations, ask-the-expert Q&A, and roundtables, all online and 100% free!
- [Expo 2021 – Episode 40: Setting Ring End Gaps](https://engineperformanceexpo.com/mini-series/expo-2021-episode-40-setting-ring-end-gaps/) - Joe Castello and Lake Speed Jr take us through the purpose of ring end gaps, show us how to figure out what the proper gap, and provide a demo on setting them
- [Expo 2021 – Episode 39: Assembly Tips & Tricks (Part 2)](https://engineperformanceexpo.com/mini-series/expo-2021-episode-39-assembly-tips-tricks-part-2/) - Jon Kaase joins Lake Speed Jr and Joe Castello for an entertaining Q&A with the audience. Then we go through modifying a Chevy LS production block for racing
- [Expo 2023 - Episode 06: Do's and Don'ts of Cylinder Head & Manifold Porting](https://engineperformanceexpo.com/mini-series/expo-2023-episode-6-dos-and-donts-of-cylinder-head-manifold-porting/) - Dan Begle from Mahle and Billy Fisher from Straub Technologies dive into the secrets of porting cylinder heads and port matching to produce more horsepower.
- [Expo 2021 – Episode 37: Performance Diesel Part 2](https://engineperformanceexpo.com/mini-series/expo-2021-episode-37-performance-diesel-part-2/) - In part 2 of our series on performance diesel we return to Choate Engineering to see custom part manufacturing before heading in-studio for a Q&A session
- [Expo 2021 - Episode 35: John Callies Interview](https://engineperformanceexpo.com/mini-series/expo-2021-episode-35-john-callies-interview/) - In one of our first Engine Builder Interviews, Expo MC Joe Castello sat down with the legendary John Callies to talk about his amazing career in motorsports
- [Expo 2021 - Episode 33: Lifter Bushings Part 1 - Installation](https://engineperformanceexpo.com/mini-series/expo-2021-episode-33-lifter-bushings-part-1-installation/) - This episode is a deep dive into keyed lifter bushing installation starting with a walk through of the process and then a demonstration of each step in it.
- [Expo 2021 – Episode 34: Lifter Bushings Part 2 - Ask the Experts](https://engineperformanceexpo.com/mini-series/expo-2021-episode-34-lifter-bushings-part-2-ask-the-experts/) - Following the lifter bushing installation demo in episode 33, John Callies is joined by Lake Speed Jr and Ed Kiebler for a live audience Q&A session on lifters
- [Expo 2021 – Episode 32: Nitrous with Pat Musi](https://engineperformanceexpo.com/mini-series/expo-2021-episode-32-nitrous-with-pat-musi/) - For this segment, we traveled down to North Carolina to talk Nitrous and have a little Q&A with Pat Musi of Musi Enterprises, and home of Musi Racing Engines
- [Expo 2021 - Episode 30: Block Sleeving Demonstration](https://engineperformanceexpo.com/mini-series/expo-2021-episode-30-block-sleeving-demonstration/) - In episode 30, we dive deep into block sleeving with demonstrations from MPR Racing on sleeving a Coyote block, and BES Racing sleeving an LT block
- [Expo 2021 - Episode 29: Turbocharger Q&A](https://engineperformanceexpo.com/mini-series/expo-2021-episode-29-turbocharger-qa/) - Host Joe Castello is joined Randy Neal and Mike Moran to talk about the challenges of turbocharging and how nearly anyone interested can get started with it.
- [Expo 2021 – Episode 28: Moran Motorsports Shop Tour](https://engineperformanceexpo.com/mini-series/expo-2021-episode-28-moran-motorsports-shop-tour/) - We head up to Michigan to visit Mike Moran of Moran Motorsports and get a tour of his amazing shop, home to some of the most awe-inspiring cars you've seen.
- [Expo 2021 - Episode 27: Troy LaCrone & Jim Gray Interview](https://engineperformanceexpo.com/mini-series/expo-2021-episode-27-troy-lacrone-jim-gray-interview/) - Revisiting Expo 2021, Expo host Joe Castello sits down with Outlaw Style racing king, Troy LaCrone and his engine builder Jim Gray of Bullet Racing Engines
- [Expo 2021 - EFI vs. Carburetor Tuning Do's & Don'ts](https://engineperformanceexpo.com/mini-series/expo-2021-efi-vs-carburetor-tuning-dos-donts/) - It's carburetor vs EFI as EFI University’s Ben Strader takes us to school on engine tune-up and break-in do's and don'ts, as well as the myth of the "Fat Tune".
- [Expo 2021 – Episode 24: Valvetrain - Cams, Pushrods, Rockers, Lifters & Valve Springs](https://engineperformanceexpo.com/mini-series/expo-2021-episode-24-valvetrain-cams-pushrods-rockers-lifters-valve-springs/) - Billy Godbold does an educational session on valvetrains and low shock technology, the standard for power and durability across the spectrum of race engines
- [Expo 2021 - Episode 23: Valves, Valve Seats & Guides](https://engineperformanceexpo.com/mini-series/expo-2021-episode-23-valves-valve-seats-guides/) - Expo host Joe Castello is joined by the AERA Engine Builder's Association's Chuck Lynch to dive into everything you need to know about seat and guide machining.
- [Expo 2021 – Episode 21: Seat & Guide Machining (Part 1)](https://engineperformanceexpo.com/mini-series/expo-2021-episode-21-seat-guide-machining-part-1/) - In this machining how-to feature, we dive into seat and guide machining with lots of insight on speeds and feeds from the industry’s top engine builders.
- [Expo 2021 – Episode 22: Seat & Guide Machining (Part 2)](https://engineperformanceexpo.com/mini-series/expo-2021-episode-22-seat-guide-machining-part-2/) - In an impromptu interview, John Callies and Chris Straub talk about Callies' contribution to Pontiac's racing program & the evolution of today’s cylinder head.
- [Expo 2021 - Episode 20: Interview with Ed Pink](https://engineperformanceexpo.com/mini-series/expo-2021-episode-20-interview-with-ed-pink/) - In this episode from the 2021 Expo, Joe Castello talks with "The Old Master", Ed Pink, as he recalls his more than 50 years in the performance engine industry.
- [Expo 2021 - Episode 19: 5-Axis Machining](https://engineperformanceexpo.com/mini-series/expo-2021-episode-19-5-axis-machining/) - Warren Johnson drop some knowledge for young engine builders, then we get 3 demos on porting with 5 axis CNC machines. The episode concludes with a Q&A session
- [Expo 2021 - Episode 18: Interview with Warren Johnson](https://engineperformanceexpo.com/mini-series/expo-2021-episode-18-interview-with-warren-johnson/) - The guys sit down with the “Professor of Pro Stock”, Warren Johnson, to get his insights on all things performance engine plus a bit of Ford vs Chevy banter
- [Expo 2021 - Episode 17: Custom Parts Manufacturing](https://engineperformanceexpo.com/mini-series/expo-2021-episode-17-custom-parts-manufacturing/) - It's a custom parts manufacturing episode: porting an LSA blower manifold, creating closed deck inserts, milling a custom profile on a crankshaft, plus Q&A
- [Expo 2021 – Episode 16: Engine Lubrication System – Pumps, Pans, Oil, Filters & more (Part 3)](https://engineperformanceexpo.com/mini-series/expo-2021-episode-16-engine-lubrication-system-pumps-pans-oil-filters-more-part-3/) - In the final segment of our dive into engine lubrication systems, the guys from Driven Racing Oil drill into the ins-and-outs of racing oil blends
- [Expo 2021 – Episode 15: Engine Lubrication System – Pumps, Pans, Oil, Filters & more (Part 2)](https://engineperformanceexpo.com/mini-series/expo-2021-episode-15-engine-lubrication-system-pumps-pans-oil-filters-more-part-2/) - Lake Speed Jr is joined by Melling’s Mike Osterhaus and Cale Risinger to field questions on pumps, pans, clearances, filters and everything oil.
- [Expo 2021 – Episode 14: Engine Lubrication Systems – Pumps, Pans, Oil, Filters & more (part 1)](https://engineperformanceexpo.com/mini-series/expo-2021-episode-14-engine-lubrication-system-pumps-pans-oil-filters-more-part-1/) - Joe and Lake recap day 1's sessions, then we go to Melling Engine Parts for a deep dive into the mechanics of oil pumps & engine lubrication systems.
- [Expo 2021 – Episode 12: LS Engine Components](https://engineperformanceexpo.com/mini-series/expo-2021-episode-12-ls-engine-components/) - Jeff Havens of Silver Seal and Chris Straub of Straub Technologies talk about hard-to-find LS engine components, and show some of the high-end parts available.
- [Expo 2021 – Episode 13: Cleaning Equipment](https://engineperformanceexpo.com/mini-series/expo-2021-episode-13-cleaning-equipment/) - All about cleaning and prepping engine blocks and components from spray washers to ultrasonic systems, we break down what you need to know and take audience Q&A
- [Expo 2021 – Episode 11: Pistons, Pins, Clearances and Coatings](https://engineperformanceexpo.com/mini-series/expo-2021-episode-11-pistons-pins-clearances-and-coatings/) - Lake Speed Jr is joined by the guys from Roush-Yates Engines to talk about everything piston—materials, design, heads, skirts, rings & oil—plus an audience Q&A
- [Expo 2021 – Episode 10: Diamond Pistons](https://engineperformanceexpo.com/mini-series/expo-2021-episode-10-diamond-pistons/) - We took a trip up to Clinton, Michigan to visit Diamond Pistons, see the facilities, learn about their R&D, and get a look at their custom piston designs.
- [Expo 2021 – Episode 9: Rotating Assembly & Balancing Machine Demo](https://engineperformanceexpo.com/mini-series/expo-2021-episode-9-rotating-assembly-balancing-machine-demo/) - CWT Industries’ Randy Neal walks host Joe Castello through a live demonstration of balancing the Expo engine's rotating assembly on CWT’s 5500 Multi-Bal machine
- [Expo 2021 – Episode 8: Rotating Assembly & Balancing Considerations](https://engineperformanceexpo.com/mini-series/expo-2021-episode-8-rotating-assembly-balancing-considerations/) - We learn the concepts and proper techniques in balancing rotating assemblies, get a demo of cutting an aero wing camshaft profile, and close with a Q&A session
- [Episode 7 Part 3: Cylinder Honing and Surfacing Demo](https://engineperformanceexpo.com/mini-series/episode-7-part-3-cylinder-honing-and-surfacing-demo/) - In the final episode of this 3-part series, Rottler Manufacturing’s Ed Kiebler gives an in-depth demonstration on how to get the perfect cylinder surface finish
- [Expo 2021 – Episode 7 Part 2: Cylinder Honing and Surface Considerations](https://engineperformanceexpo.com/mini-series/expo-2021-episode-7-part-2-cylinder-honing-and-surface-considerations/) - In part 2 of this 3 part series we visit three master engine builders to learn how they approach cylinder honing and surafacing
- [Expo 2021 – Episode 7 Part 1: Cylinder Honing and Surface Considerations](https://engineperformanceexpo.com/mini-series/expo-2021-episode-7-part-1-cylinder-honing-and-surface-considerations/) - In part 1 of a 3-part series, Ben Strader, Ed Kiebler, and Keith Jones hold a whiteboard session to explain the science behind honing and cylinder finishes.
- [Expo 2021 - Episode 6: Engine Builder Interview - Doug Yates](https://engineperformanceexpo.com/mini-series/expo-2021-episode-6-engine-builder-interview-doug-yates/) - We climb in the wayback machine once again to re-visit our very first engine builder interview -- the legendary Doug Yates of Roush Yates Engines.
- [Expo 2023 - Episode 58 – Featured Engine Build: How Much Power Did It Make?](https://engineperformanceexpo.com/mini-series/episode-58-featured-engine-build-how-much-power-did-it-make/) - We head back to EFI University where Ben and Lake have loaded the Expo Engine on the dyno and are ready for the big run to find out just how much power it makes
- [Expo 2021 - Episode 5: Surface Machining](https://engineperformanceexpo.com/mini-series/expo-2021-episode-5-surface-machining/) - We go back to January of 2021 for a deep dive into surface machining tips, tricks, and techniques from a trio of the world’s best engine builders.
- [Expo 2021 - Episode 4: Surfaces Finishes and Sealing](https://engineperformanceexpo.com/mini-series/expo-2021-episode-4-surfaces-finishes-and-sealing/) - The AERA's Chuck Lynch takes us through the ins and outs of surface finishes, sealing, and the effect on gasket seal.
- [Expo 2021 - Episode 3: Block Machining](https://engineperformanceexpo.com/mini-series/expo-2021-episode-3-block-machining/) - We take a deep dive into block machining with the pros from CNC Blockworks, BES Racing Engines, and RoushYates Engines before holding a Q&A with the audience.
- [Expo 2021 - Episode 2: Bore Coatings](https://engineperformanceexpo.com/mini-series/expo-2021-episode-2-bore-coatings/) - Revisiting episode 2 from January of 2021, Lake heads down to Cleveland, GA to see Jake Raby of Flat 6 Innovations to talk bore coatings and "ring seal soup"
- [Expo 2023 – Episode 59 – Closing Roundtable](https://engineperformanceexpo.com/mini-series/expo-2023-episode-59-closing-roundtable/) - For the final episode of Expo 2023, our panel talks about their love of competition, sharing knowledge, and why no one wants to win on a solo run in the finals
- [Expo 2023 – Episode 57 – Technology Roundtable](https://engineperformanceexpo.com/mini-series/expo-2023-episode-57-technology-roundtable/) - Joe and Lake sit down with a panel of experts to discuss advancements in engine building technology, where it's going next, and do some Q&A with the audience
- [Expo 2023 – Episode 56 – Tech 101: Lifters & Bushings](https://engineperformanceexpo.com/mini-series/expo-2023-episode-56-tech-101-lifters-bushings/) - For episode 56 Lake Speed Jr takes us back to “professor” John Callies’ shop for an advanced lesson on lifter technology and how it plays into more horsepower
- [Expo 2023 – Episode 54 – Featured Engine Build: Valvetrain RPM Limits](https://engineperformanceexpo.com/mini-series/expo-2023-episode-54-featured-engine-build-valvetrain-rpm-limits/) - Lake and Ben go back to EFI University and our Expo engine build to try and solve the valve float problem they’re running into at 8100 RPM
- [Expo 2023 – Episode 53 – Roundtable: Career Path](https://engineperformanceexpo.com/mini-series/expo-2023-episode-53-roundtable-career-path/) - Joe Castello and Lake Speed Jr sit down with an all-star group for a roundtable discussion on how to begin (or switch to) a career in the motorsports industry
- [Expo 2023 – Episode 52 – Advanced Technology Feature: Piston Coatings](https://engineperformanceexpo.com/mini-series/expo-2023-episode-52-advanced-technology-feature-piston-coatings/) - Lake Speed Jr visits Dyno Don MacAskill at Shaver Racing Engines to get the lowdown on compensating for larger cylinder bores with advanced piston coatings
- [Expo 2023 – Episode 51 – Whiteboard Session: Oil](https://engineperformanceexpo.com/mini-series/engine-performance-expo-2023-episode-51-whiteboard-session-oil/) - Fresh off the oil level test on the dyno (episode 50), the guys head back in studio for a whiteboard session on what they learned about the effect on horsepower
- [Expo 2023 - Episode 43 – Spotlight: CP-Carrillo](https://engineperformanceexpo.com/mini-series/expo-2023-episode-43-spotlight-cp-carrillo/) - Joe Castello and Lake Speed Jr take a few minutes to talk with Ric Panneton from leading performance rods and pistons manufacturer, CP-Carrillo.
- [Expo 2023 - Full Day 1 - January 13, 2023](https://engineperformanceexpo.com/mini-series/expo-2023-full-day-1-january-13-2023/) - Watch every session from day 1 of the 2023 Engine Performance Expo. Recorded live on January 13, 2023.
- [Expo 2023 - Full Day 2 - January 14, 2023](https://engineperformanceexpo.com/mini-series/expo-2023-full-day-2-january-14-2023/) - Watch every session from day 2 of the 2023 Engine Performance Expo. Recorded live on January 14, 2023.
- [Episode 54 - Career Path Feature: EFI University](https://engineperformanceexpo.com/mini-series/career-path-feature-efi-university/) - Ben Strader talks about EFI University and its mission to both the new and the not-so-new develop next generation of high performance engines.
- [Expo 2023 - Episode 42 - Tech 101 Feature: Crankshaft Design](https://engineperformanceexpo.com/mini-series/expo-2023-episode-42-tech-101-feature-crankshaft-design/) - In episode 42, we step into the classroom with "professor” John Callies for a technical deep dive into racing crankshaft design, repair, and modification
- [Expo 2023 - Episode 41 - Engine Builder Interview: Steve Morris](https://engineperformanceexpo.com/mini-series/expo-2023-episode-41-engine-builder-interview-steve-morris/) - In a joint episode with the Hidden Horsepower Podcast, we sit down for an interview with the King of Boosted, Steve Morris of Steve Morris Racing Engines.
- [Expo 2023 - Episode 40 - Product Preview: Clevite Model F Bearings](https://engineperformanceexpo.com/mini-series/expo-2023-episode-40-product-preview-clevite-model-f-bearings/) - We get a sneak peek at Mahle’s new F series bearings, based on the popular H series, with new overlay plating technology to increase seizure resistance by 90%+
- [Expo 2023 - Episode 39 - Roundtable Discussion: Surface Finish](https://engineperformanceexpo.com/mini-series/expo-2023-episode-39-roundtable-discussion-surface-finish/) - Capping off our cylinder honing & finishing series, our expert panel discusses the secrets to getting the right surface finish and boosting engine performance
- [Expo 2023 - Episode 38 - Advanced Teach Feature: Cross Hatch Angle](https://engineperformanceexpo.com/mini-series/expo-2023-episode-38-advanced-teach-feature-cross-hatch-angle/) - Lake Speed Jr takes us to Rottler Mfg. HQ for an advanced course in honing cross hatch angle & why it's a part of what Lake likes to call the “ring seal soup.”
- [Expo 2023 - Episode 37 - Whiteboard: Cylinder Surface System](https://engineperformanceexpo.com/mini-series/episode-37-whiteboard-cylinder-surface-system/) - Lake Speed Jr is joined by Mark Malburg of Digital Metrology for a whiteboard session on cylinder finishes and visualizing them with a profilometer and software
- [Expo 2023 - Episode 36 - Advanced Tech Feature: Roughness vs Waviness](https://engineperformanceexpo.com/mini-series/expo-2023-episode-36-advanced-tech-feature-roughness-vs-waviness/) - This episode is an advanced class in roughness vs waviness, and why understanding waviness in critical to ensuring uniform clamping force on today's MLS gaskets
- [Expo 2023 - Episode 35 - Product Spotlight: Point One Manufacturing](https://engineperformanceexpo.com/mini-series/expo-2023-episode-35-product-spotlight-point-one-manufacturing/) - Joe Castello, Ben Strader, and Billy Godbold sit down with Kevin Feeny of P1 to talk about the company’s new line of high performance studs and fasteners
- [Expo 2023 - Episode 34 - Tech 101 Feature: Torque vs Stretch](https://engineperformanceexpo.com/mini-series/expo-2023-episode-34-tech-101-feature-torque-vs-stretch/) - We head out with to Jasper Engines & Transmissions in Jasper, Indiana for a master class on torque vs stretch and how to get the right bolt clamp force.
- [Expo 2023 - Episode 33 – Engine Builder Interview: Greg & Aaron Stanfield](https://engineperformanceexpo.com/mini-series/expo-2023-episode-33-engine-builder-interview-greg-aaron-stanfield/) - In another joint episode with the Hidden Horsepower Podcast, Joe and Lake sit down for an interview with NHRA father and son legends, Greg and Aaron Stanfield
- [Expo 2023 - Episode 32 - Tech 101: Bore Geometry & Clamp Load](https://engineperformanceexpo.com/mini-series/expo-2023-episode-32-tech-101-bore-geometry-clamp-load/) - Rottler Manfacturing’s Ed Kiebler shows us why clamp load simulating what the cylinder experiences in the engine is key to honing the proper bore geometry
- [Expo 2023 - Episode 31 – Combustion Analysis Roundtable](https://engineperformanceexpo.com/mini-series/expo-2023-episode-31-combustion-analysis-roundtable/) - Lake and Joe sit down with George Bryce, Mark Cronquist, Ben Strader, & Billy Godbold to talk about why in-cylinder pressure "disrobes everyone"
- [Expo 2023 - Episode 27 - Tech 101: Balance Then Dampen](https://engineperformanceexpo.com/mini-series/expo-2023-episode-27-balance-then-dampen/) - Lake and Ben Strader go to the shop floor to talk with Randy Neal of CWT Technologies, and discuss the balancing versus dampening, and why you need both
- [Expo 2023 - Episode 30: In-Cylinder Combustion Analysis](https://engineperformanceexpo.com/mini-series/expo-2023-episode-30-in-cylinder-combustion-analysis/) - Lake and Ben Strader head out to EFI University to show how combustion analysis for each cylinder allowed them to gain 39ft-lb of torque in their LS engine
- [Expo 2023 - Episode 29 - Show Open & Hands-on Training Opportunities](https://engineperformanceexpo.com/mini-series/expo-2023-episode-29-show-open-hands-on-training-opportunities/) - Lake and Joe open Day 2 of Expo 2023 with a tease of the day's events and an announcement of new hands-on training programs available to Expo viewers
- [Expo 2023 - Episode 28 - Roundtable: The Future of the Internal Combustion Engine](https://engineperformanceexpo.com/mini-series/expo-2023-episode-28-roundtable-the-future-of-the-internal-combustion-engine/) - Lake and Joe host an expert roundtable on the future of the internal combustion engine and why an all-electric future is by no means a foregone conclusion
- [Expo 2023 - Episode 25 - Tech 101: Bearing Failure Analysis](https://engineperformanceexpo.com/mini-series/expo-2023-episode-25-tech-101-bearing-failure-analysis/) - Lake Speed Jr gets together with Mahle’s Dan Begle to deliver a master class on IDing the most common causes of bearing failure and how to prevent it.
- [Expo 2023 - Episode 24 - Roundtable: Machining Best Practices](https://engineperformanceexpo.com/mini-series/expo-2023-episode-24-roundtable-machining-best-practices/) - We sit down with a panel of performance engine builders to talk about the advances in engine machining & CNCs, and share what they've learned as best practices
- [Expo 2023 - Episode 23 - Product Spotlight: Rottler EM45 Demo](https://engineperformanceexpo.com/mini-series/expo-2023-episode-23-product-spotlight-rottler-em45-demo/) - We get a sneak preview of the new Rottler EM45, a state-of-the-art CNC machine with a large work envelope in a smaller, more floor space-efficient footprint
- [Expo 2023 - Episode 22 - Roundtable: Engine Builder Hall of Fame](https://engineperformanceexpo.com/mini-series/expo-2023-episode-22-roundtable-engine-builder-hall-of-fame/) - The world's leading engine builders discuss the creation of the Engine Builder Hall of Fame to honor the pioneers of the engine building industry
- [Expo 2023 - Episode 21 - Featured Engine Build: Teardown](https://engineperformanceexpo.com/mini-series/expo-2023-episode-21-featured-engine-build-teardown/) - Lake Speed Jr tears down the featured expo engine so we can get a look at its condition and prep it for upcoming segments
- [Expo 2023 - Episode 20 - Lifetime Achievement Award: John Callies](https://engineperformanceexpo.com/mini-series/expo-2023-episode-20-lifetime-achievement-award-john-callies/) - Joe Castello and Lake Speed Jr present the Engine Performance Expo’s third Lifetime Achievement Award to John Callies.
- [Expo 2023 - Episode 19 - Tech 101: Block Honing](https://engineperformanceexpo.com/mini-series/expo-2023-episode-19-tech-101-block-honing/) - Lake heads over to KB Racing to see Greg Anderson and get an up-close look and some inside tips on how NHRA’s winningest Pro Stock driver hones an engine block
- [Expo 2023 - Episode 18 - Roundtable: Engine Assembly](https://engineperformanceexpo.com/mini-series/expo-2023-episode-18-roundtable-engine-assembly/) - Lake and Joe are joined by Mark Cronquist, Cass Choate, Keith Dorton, Jon Kaase, Jimmy Barton for a roundtable talk on the best practices in engine assembly
- [Expo 2023 - Episode 17 - Tech 101: Ultrasonic Cleaning](https://engineperformanceexpo.com/mini-series/expo-2023-episode-17-tech-101-ultrasonic-cleaning/) - Lake and Ben break down the 4 components of cleaning (time, temp, concentration and agitation) and demo ultrasonic cleaning to easily deliver cleaner parts.
- [Expo 2023 - Episode 16 - Roundtable: Competition Engine Development](https://engineperformanceexpo.com/mini-series/expo-2023-episode-16-roundtable-competition-engine-development/) - Mark Cronquist, Ben Strader, Keith Dorton, Jon Kaase, and George Bryce sit down to talk about “the race within racing” — developing competition engines.
- [Expo 2023 - Episode 15 - Tech 101: Setting Ring End Gap](https://engineperformanceexpo.com/mini-series/expo-2023-episode-15-tech-101-setting-ring-end-gap/) - Lake heads down to Jimmy Barton's Hot Rod Garage to get Jimmy's answers to one of the questions he hears most often: “how big should the ring end gap be?”
- [Expo 2023 -Episode 14 - Roundtable: Industry Economic Outlook](https://engineperformanceexpo.com/mini-series/expo-2023-episode-14-roundtable-industry-economic-outlook/) - A slate of "Captains of the Performance Engine Industry" give their take on the state of the economy and its current and future impact on the business of racing
- [Expo 2023 - Episode 13 - Tech 101: EFI & Clutches](https://engineperformanceexpo.com/mini-series/expo-2023-episode-13-tech-101-efi-clutches/) - Lake Speed Jr and Team Total Seal reveal why the laptop is a critical component to ensure that fuel delivery works with the clutch to get the shift off clean
- [Expo 2023 - Episode 12 - Featured Engine Build: Corrosion Prevention](https://engineperformanceexpo.com/mini-series/expo-2023-episode-12-featured-engine-build-corrosion-prevention/) - Lake Speed Jr and his profilometer show how even a little oxidation can alter cylinder wall surfaces and how to prevent it with the help of a fogging spray.
- [Expo 2023 - Episode 11 - Roundtable: Valvetrain](https://engineperformanceexpo.com/mini-series/expo-2023-episode-11-roundtable-valvetrain/) - Lake Speed Jr, Mark Cronquist, Scooter Brothers, Billy Godbold, and Ben Strader discuss their experiences and how new technology is transforming the valvetrain
- [Expo 2023 - Episode 08 - Advance Tech Feature: Spintron](https://engineperformanceexpo.com/mini-series/expo-2023-episode-8-advance-tech-feature-spintron/) - Ben Strader from EFI University provides a master class in testing, diagnosing and troubleshooting engine performance using the Spintron
- [Expo 2023 - Episode 09 - Whiteboard Session: Valvetrain](https://engineperformanceexpo.com/mini-series/expo-2023-episode-9-whiteboard-session-valvetrain/) - Lake Speed Jr, Ben Strader, and Billy Godbold have a whiteboard session on pinpointing the source of engine power loss above certain RPM and possible fixes.
- [Expo 2023 - Episode 10 - Tech 101: Checking System Stiffness](https://engineperformanceexpo.com/mini-series/expo-2023-episode-10-tech-101-checking-system-stiffness/) - We head back to EFI University and Ben Strader to learn a genius hack that's a quick and easy way to determine an engine's gross system stiffness and boost RPMs
- [Expo 2023 - Episode 07 - Roundtable: Dyno Testing](https://engineperformanceexpo.com/mini-series/expo-2023-episode-07-roundtable-dyno-testing/) - Joe Castello and Lake Speed Jr are joined by Mark Cronquist, Jon Kaase, Jason Line, and Ben Strader for a roundtable discussion on testing engines on the dyno
- [Expo 2023 - Episode 05: Tech 101 - Engine Pro Shop Services, Inspection Tools](https://engineperformanceexpo.com/mini-series/expo-2023-episode-05-tech-101-engine-pro-shop-services-inspection-tools/) - This Tech 101 segment is all about things engine shops and builders can use: Engine Pro Services, borescopes / endoscopes, and oil analysis from SPEEDiagnositx
- [Expo 2023 - Episode 04 - Engine Builder Interview: Jason Line](https://engineperformanceexpo.com/mini-series/expo-2023-episode-04-engine-builder-interview-jason-line/) - In a joint episode with Hidden Horsepower Podcast, Lake and Joe sit down with NHRA Pro Stock legend, Jason Line, for an entertaining engine builder interview
- [Expo 2023 - Episode 03 - Leak Down Testing](https://engineperformanceexpo.com/mini-series/expo-2023-episode-03-leak-down-testing/) - Lake Speed Jr and Ben Strader head back to EFI University to perform a Leak Down Test on their engine and show best practices, shortcuts and tips from the pros.
- [Expo 2023 - Episode 02 - Whiteboard Session: Tuning with George Bryce](https://engineperformanceexpo.com/mini-series/expo-2023-episode-02-whiteboard-session-tuning-with-george-bryce/) - George Bryce brings his one of his patented Tech Talk Whiteboard Sessions to school Lake Speed Jr and Ben Strader on Tuning by listening to what the engine says
- [Expo 2023 - Episode 01 - Show Open: Danny Jesel Tribute & Fixing Fuel Pressure](https://engineperformanceexpo.com/mini-series/episode-01-danny-jesel-tribute-fixing-fuel-pressure/) - Expo 2023 begins with a tribute to the late Danny Jesel followed by a troubleshooting session to solve the fuel pressure problems in their 1,000HP engine
- [Episode 55 - Roundtable: Day 4 Wrap-up and Show Close](https://engineperformanceexpo.com/mini-series/episode-55-roundtable-day-4-wrap-up-and-show-close/) - In the final episode of the 2022 Expo, the guys talk about the value of sharing ideas and their knowledge to help the next generation make motorsports better
- [Episode 53 - Engine Builder Interview: Tony Bischoff](https://engineperformanceexpo.com/mini-series/episode-53-engine-builder-interview-tony-bischoff/) - For the final engine builder interview of the 2022 Expo, Joe and Lake sit down with the Horsepower King, Tony Bischoff of BES Racing Engines
- [Episode 52 - Cylinder Head Roundtable](https://engineperformanceexpo.com/mini-series/episode-52-cylinder-head-roundtable/) - In one of the last roundtables of the 2022 Expo, Joe and Lake are joined by John Callies, Brodix, Vic Hill, and Straub Technologies to talk cylinder heads.
- [Episode 51 - Procharger on the Dyno](https://engineperformanceexpo.com/mini-series/episode-51-procharger-on-the-dyno/) - Lake and Ben Strader put the procharger-boosted engine on the Dyno to finally answer the biggest question of the Expo: Can their engine can make 1,000 HP?
- [Episode 50 - Parts Supply Roundtable](https://engineperformanceexpo.com/mini-series/episode-50-parts-supply-roundtable/) - A panel of performance engine industry experts talk about strategies to overcome parts shortages and inflation, and how racers can adapt in their own projects.
- [Episode 42 - Featured Engine Build: Break-in](https://engineperformanceexpo.com/mini-series/episode-42-featured-engine-build-break-in/) - Ben and Lake load the LS engine on the dyno and go through the oil and fuel and diagnostic steps for proper break-in before trying for the full boosted 1,000 HP
- [Episode 48 - Engine Builder Interview: Vic Hill](https://engineperformanceexpo.com/mini-series/episode-48-engine-builder-interview-vic-hill/) - In a joint broadcast with the @hiddenhorsepowerpodcast, legendary Dirt Late Model racer and engine builder, Vic Hill, sits down for a chat with Lake and Joe
- [Episode 49 - Advance Tech Feature: Profilometer Setup](https://engineperformanceexpo.com/mini-series/episode-49-advance-tech-feature-profilometer-setup/) - Keith Jones returns in this advanced technology feature to go through the unboxing and proper setup of a profilometer. Bonus: Tech Chip from Liberty Performance
- [Episode 47 - Cross Hatch Angle and Surface Finish](https://engineperformanceexpo.com/mini-series/episode-47-cross-hatch-angle-and-surface-finish/) - Lake is joined by Keith Jones for a lesson on two terms often confused but unrelated—Cross Hatch Angle and Surface Finish—and their role in performance engines
- [We're Back Live on January 13th & 14th!](https://engineperformanceexpo.com/news-events/were-back-live-on-january-13th-14th/) - The Engine Performance Expo returns LIVE on January 13th & 14th 2023, and Ben Strader has something great waiting for those who watch...
- [Episode 46 - Technology Rountable](https://engineperformanceexpo.com/mini-series/episode-46-technology-rountable/) - Joe and Lake sit down with a panel of engine technology experts to talk about where it’s best to invest your money and how to measure the results in your shop
- [Episode 44 - Preventing Cylinder Wall Surface Rust](https://engineperformanceexpo.com/mini-series/episode-44-preventing-cylinder-wall-surface-rust/) - Joe & Lake are joined by legendary NHRA engine builders Gary Stinnett and Steve Williams to talk about how they prevent surface rust on engine cylinder walls
- [Episode 45 - Diesel Power: Cummins Diesel](https://engineperformanceexpo.com/mini-series/episode-45-diesel-power-cummins-diesel/) - Lake visits D&J Precision Machine's Drew Pumphrey to talk about how it is that they get so much performance and power from the Cummins diesel engine
- [Episode 43 - Engine Builder Interview: Billy Godbold](https://engineperformanceexpo.com/mini-series/episode-43-engine-builder-interview-billy-godbold/) - Hosts Joe Castello and Lake Speed Jr sit down with physicist and Camshaft Maestro, Billy Godbold, to talk about his science-based approach to parts engineering
- [Episode 30 - Short Block Assembly](https://engineperformanceexpo.com/mini-series/episode-30-short-block-assembly/) - Lake packs up the newly finished block and heads down to Roush Yates Racing Engines to see Jimmy Barton for assembly of the (soon-to-be boosted) short block
- [Episode 38 - Featured Engine Build: Short Block Engine Assembly (Part 2)](https://engineperformanceexpo.com/mini-series/episode-38-featured-engine-build-short-block-engine-assembly-part-2/) - Picking up where they left off in episode 30, Lake Speed Jr and Jimmy Barton work through a few problems to finish the assembly of our boosted short block.
- [Episode 41 - Featured Engine Build: EFI Installation](https://engineperformanceexpo.com/mini-series/episode-41-featured-engine-build-efi-installation/) - Lake Speed Jr and Ben Strader head out to EFI University in Arizona to do the EFI install on the LS engine before they load it up on the dyno for testing
- [Episode 40: Day 3 Closing Roundtable](https://engineperformanceexpo.com/mini-series/episode-40-day-3-closing-roundtable/) - Lake and Joe are joined by Keith Dorton, Ben Strader, Mike Mucha and Mark Cronquist for a freewheeling discussion about the industry and thoughts on the future
- [Episode 39 - Engine Builder Roundtable: Testing](https://engineperformanceexpo.com/mini-series/episode-39-engine-builder-roundtable-testing/) - Some of the world's leading engine builders sit down to discuss engine testing methodologies, and best practices any builder can put to use in their own shop
- [Episode 29 - Head Porting, Seats & Guides](https://engineperformanceexpo.com/mini-series/episode-29-head-porting-seats-guides/) - The boys head to the Straub Technologies shop floor for a discussion and hands-on demo on how we get horsepower through CNC porting of the cylinder heads
- [Episode 28 - Tech 101: Selecting Fuels for Boost](https://engineperformanceexpo.com/mini-series/episode-28-tech-101-selecting-fuels-for-boost/) - Joe and Lake sit down with Ben Strader of EFI University and Freddy Turza of VP Racing Fuels to discuss how to pick the right fuel for boosting their engine
- [Episode 27 - Featured Engine Build: Heads & Valvetrain](https://engineperformanceexpo.com/mini-series/episode-27-featured-engine-build-heads-valvetrain/) - Lake & the boys review their engine project build and the cylinder head and valvetrain options they think will help them boost this engine to 1,000HP
- [Episode 37 - Featured Engine Build: Pushrods, Distance to Coil Bind and System Stiffness](https://engineperformanceexpo.com/mini-series/episode-37-featured-engine-build-pushrods-distance-to-coil-bind-and-system-stiffness/) - Lake & Joe are joined by Ben Strader & Billy Godbold to talk valvetrains, component upgrades, troubleshooting, and tips & tricks to boost engine performance.
- [Episode 36 - Mechanical Fuel Injection with Ron Shaver](https://engineperformanceexpo.com/mini-series/episode-36-mechanical-fuel-injection-with-ron-shaver/) - In this episode Lake Speed Jr heads to So Cal to see Ron Shaver at Shaver Specialty Engines and get the lowdown on mechanical fuel injection
- [Episode 35 - Tech Feature: Motor Oil 101](https://engineperformanceexpo.com/mini-series/episode-35-tech-feature-motor-oil-101/) - Lake heads over to Driven Racing Oil HQ to see fellow Certified Lubrication Specialist Bill Alexander and drill into everything you need to know about motor oil
- [Episode 34 - Engine Builder Interview: Keith Dorton](https://engineperformanceexpo.com/mini-series/season2/episode-34-engine-builder-interview-keith-dorton/) - In a joint episode with the Hidden Horsepower podcast, Joe Castello and Lake Speed Jr sit down for a conversation with racing legend Keith Dorton.
- [Episode 31 - Engine Builder Interview: Mark Cronquist](https://engineperformanceexpo.com/mini-series/episode-31-engine-builder-interview-mark-cronquist/) - Joe Castello and Lake Speed Jr sit down for a wide ranging, entertaining interview with Mark Cronquist, the legendary lead engine builder for Joe Gibbs Racing
- [Episode 32 - Advanced Tech Feature: Reverse Blueprinting](https://engineperformanceexpo.com/mini-series/episode-32-advanced-tech-feature-reverse-blueprinting/) - Lake heads west to Arizona to visit Ben Strader at EFI University and see how microscopic inspection can help find problems you can't see with the naked eye
- [Episode 33 - Piston Measuring](https://engineperformanceexpo.com/mini-series/season2/episode-33-piston-measuring/) - Lake Speed Jr heads out to Southern California and QMP Racing to see Brad Lagman and get a demo of his amazing piston measuring center, the MC-1
- [Episode 0 - Mini Series Trailer](https://engineperformanceexpo.com/news-events/episode-0-mini-series-trailer/) - Coming March 4, 2021 - The Engine Performance Expo Mini Series. Watch every seminar, every Q&A, every interview and video from the First Engine Performance Expo in order!
- [Episode 3 - Engine Builder Interview : Jon Kaase](https://engineperformanceexpo.com/mini-series/episode-3-engine-builder-interview-jon-kaase/) - In episode 3 Joe and Lake sat down for a live interview and audience Q&A with the legendary engine builder, Jon Kaase. Episode originally aired October 13, 2021
- [The Expo Returns in January 2023](https://engineperformanceexpo.com/news-events/the-expo-returns-in-january-2023/) - It's Official! The Engine Performance Expo returns this January 13 and 14, 2023. Still online, still 100% free! register now!
- [Now Accepting Sponsor Applications](https://engineperformanceexpo.com/news-events/now-accepting-sponsor-applications/) - We're now taking sponsorship applications! It's your chance to reach thousands of engine builders and enthusiasts. Slots are limited and we will sell out, so act now!
- [Engine Performance Expo Announces 2021 Expo Dates](https://engineperformanceexpo.com/news-events/engine-performance-expo-announces-2021-expo-dates/) - Three day all digital event for engine builders will be held October 14 through 16, 2021 KENT, Wash., March 3, 2021 — Show organizers today announced the second annual Engine Performance Expo will be held October 12 through 14, 2021. The Expo is a unique online event providing hands-on education, live demonstrations and interactive Q
- [Registration for the October Expo Now Open](https://engineperformanceexpo.com/news-events/registration-for-the-october-expo-now-open/) - Registration for the 2nd Engine Performance Expo, October 14-16, 2021, is now open to the general public. More engines, info and fun. 100% online and FREE!
- [Help Us Make the Next Expo Better](https://engineperformanceexpo.com/news-events/help-us-make-the-next-expo-better/) - As a person who registered for the Engine Performance Expo, we’re interested to get your opinion on what you liked about the first Expo, any areas where you think we might improve, and subjects we should cover in the next event. With that in mind, we have a quick, five question survey to get your
- [It's almost showtime!](https://engineperformanceexpo.com/news-events/its-almost-showtime/) - The expo opens in just 2 short days, here's how to login in and join us! At long last, the Expo opening is finally right around the corner. The Expo "doors" will open at 9:30AM Eastern Standard Time (GMT -5) and the show is scheduled to begin at 10AM with a big welcome from our
- [Grudge and No-Prep Racing Added to the Agenda](https://engineperformanceexpo.com/news-events/grudge-and-no-prep-racing-added-to-the-agenda/) - St Louis Street King Outlaw Troy LaCrone and his car Blue Madness 2.0 Great news! The best three days in performance engines and racing just got a little better! We’re pleased to announce that Day 2 will conclude with a virtual “Happy Hour” with St Louis Street King Outlaw, Troy LaCrone, and Bullet Engines’ Jim
- [Thursday Sponsor Thanks](https://engineperformanceexpo.com/news-events/thursday-sponsor-thanks/) - Twas the week before Christmas and we couldn’t be more excited! Not just because of Christmas, but also because it’s less than three weeks until the opening of the Engine Performance Expo!!! The Expo elves have been hard at work behind the scenes at Santa’s Workshop getting everything ready for the big days ahead, which
- [Grand Prize Giveaway – A complete LS Short block](https://engineperformanceexpo.com/news-events/grand-prize-giveaway-a-complete-ls-short-block/) - Win the LS short block we build during the Expo – a value of $10,000! Over the 3 days of the Engine Performance Expo, you’ll get to see the masters of the industry build a complete LS short block and share their secrets for building a winning engine. At the end of the Expo, one
- [Wednesday Sponsor Welcome](https://engineperformanceexpo.com/news-events/wednesday-sponsor-welcome-3/) - Only 4 short weeks before the Expo opens! Are you registered yet? If you are, good for you! You’re automatically entered to win this week’s Friday Giveaway, which is an engine pre-luber system from Expo sponsor Silver Seal — a $205 value! If you’re not already registered, just go to the expo registration page and
- [The Friday Giveaway Winner (December 4)](https://engineperformanceexpo.com/news-events/the-friday-giveaway-winner-december-4/) - A big congratulations to Erwin Montanez of Opal Cliffs Auto Center in California! He's the last Friday Giveaway winner of a set of Morel 5290 Hydraulic Roller lifters!!! This week our Friday Giveaway will be an Engine Pre-Luber System from Silver Seal. A $205 value! In order to be entered to win, all you have
- [Wednesday Sponsor Welcome](https://engineperformanceexpo.com/news-events/wednesday-sponsor-welcome-2/) - Only 35 days until the Expo! Today we’d like to thank several more of our amazing sponsors for their support and helping us put together what we think is going to be a one-of-a-kind event. If you haven’t already, please visit their websites, follow them on social media, and let them know that you appreciate
- [First Giveaway Winner Announced](https://engineperformanceexpo.com/news-events/first-giveaway-winner-announced/) - We're pleased to announce our winner of a custom cam shaft from Straub Technologies is (drumroll please)... Keith Dunnuck of Dunnuck Racing Enterprise!
- [Friday Giveaway -- Morel 5290 Hyd Roller lifters](https://engineperformanceexpo.com/news-events/friday-giveaway-morel-5290-hyd-roller-lifters/) - We're pleased to announce this week's Friday giveaway for one lucky registered attendee will be a set of Morel 5290 Hyd Roller lifters valued at over $400!!! To enter to win, simply register to attend the Engine Performance Expo before 5pm Pacific time this Friday, December 4th. Winner will be announced on Monday, December 7.
- [NHRA's Joe Castello to MC Engine Performance Expo](https://engineperformanceexpo.com/news-events/nhras-joe-castello-to-mc-engine-performance-expo/) - We are excited to announce that Joe Castello, the "Podfather of Drag Racing" and voice of the NHRA Camping World Drag Racing Series, will be acting as Master of Ceremonies for the Engine Performance Expo. Castello is a 20-year veteran of motorsports broadcasting and his WFO Radio show helped start the now flourishing drag racing
- [Wednesday Sponsor Welcome](https://engineperformanceexpo.com/news-events/wednesday-sponsor-welcome/) - Only 49 days and counting until the Expo! Today we’d like to thank several more sponsors for their support and helping us put together what we think is going to be a one-of-a-kind event. If you haven’t already, please visit their websites, follow them on social media, and let them know that you appreciate their
- [Meet our Presenting Sponsors](https://engineperformanceexpo.com/news-events/meet-our-presenting-sponsors/) - We are pleased to announce five new Presenting Sponsors at the Engine Performance Expo: Dart Machinery, COMP Cams, Edelbrock, The AAM Group and Diamond Pistons.
- [Doug Yates is Our Engine Builder Interview First Day of the Expo](https://engineperformanceexpo.com/news-events/doug-yates-is-our-engine-builder-interview-first-day-of-the-expo/) - The Engine Performance Expo is pleased to announce that NASCAR and Ford Performance legend, Doug Yates, will be our first live Engine Builder interview at the Engine Builder Expo online Jan. 7, 2021. Register for free on the website
- [Welcome our Expo Sponsors](https://engineperformanceexpo.com/news-events/welcome-our-expo-sponsors/) - A big thank you to our founding sponsors! Please let them know that you appreciate their efforts in making this one-of-a-kind event free to attend!
- [A little preview of coming events](https://engineperformanceexpo.com/news-events/a-little-preview-of-coming-events/) - Our Performance Engine experts are hard at work. Today the gang was out shooting an LSA blower being machined on a Rottler EM69P at Straub Technologies in Piney Flats, TN.
- [Day 3 Seminar Speakers Announced](https://engineperformanceexpo.com/news-events/day-3-seminar-speakers-announced/) - Our exciting lineup of seminar speakers just keeps getting better! For the final day of the Engine Performance Expo (January 9, 2021) we’re kicking it into high gear with sessions on turbocharging and nitrous as well as tips & tricks on engine assembly and dyno testing brought to you by some of the biggest names
- [Day 2 Seminar Speakers Announced](https://engineperformanceexpo.com/news-events/day-2-seminar-speakers-announced/) - The Engine Performance Expo is pleased to announce the speaker lineup for Day 2’s (January 8, 2021) educational seminar and Q&A series. All times are Eastern Standard Time (GMT -5) Day 2 – January 8, 2021 – Seminar Session 2Seminar with Q&A – Cylinder Head & Manifold Porting Cylinder Head & Manifold Porting Speaker: Darin
- [Day 1 Seminar Series Speakers Announced](https://engineperformanceexpo.com/news-events/day-1-seminar-series-speakers-announced/) - Seminar speakers for Expo Day 1, January 7, 2021, will include experts talking surface finishes and sealing cylinder honing & rotating assembly balancing.
- [Engine Performance Expo Announced](https://engineperformanceexpo.com/news-events/engine-performance-expo-announced/) - Performance Engine industry leaders announce Engine Performance Expo, a one-of-kind, interactive, online educational event on January 7-9, 2021

## Pages

- [Home](https://engineperformanceexpo.com/) - The Engine Performance Expo is a 100% free online event delivering information, how-tos, and business tips on modern performance engine skills and technologies
- [Mini Series](https://engineperformanceexpo.com/mini-series/) - Watch every education, how-to, roundtable discussion, and interview from all the Expos on-demand and 100% free from your computer, phone and smart TV!
- [Mini Series (Season 5 - 2025)](https://engineperformanceexpo.com/mini-series/mini-series-season-5-2025/) - Engine Performance Expo Season 5 July 2025 EPExpo 2025 Live – Teaser Video Gallery EPExpo 2025 Live – Teaser Video 2025, Mini Series EPExpo 2025 Live – Teaser Video Expo 2025 was July 16-18, 2025. We're still working on the full videos from the presentations. Here's a short teaser for you to enjoy in the
- [Mini Series (Season 4 - 2024)](https://engineperformanceexpo.com/mini-series/mini-series-season-4-2024/) - Engine Performance Expo Season 4 Aired live in January 2024 Expo 2024 – Day 1 Replay Gallery Expo 2024 – Day 1 Replay 2024, Mini Series Expo 2024 – Day 1 Replay Binge on Day 1 of the Engine Performance Expo 2024. Timecodes are included so you can skip to your desired segment admin2024-01-15T20:24:58-08:00January 15,
- [Privacy](https://engineperformanceexpo.com/privacy-policy/) - Engine Performance Expo Privacy Policy What personal data we collect and why we collect it Contact and Registration forms If you use a contact or registration form on our website, any information you provide (email, name, address, telephone number, etc.) may be used to contact you by a member of the the Engine Performance Expo
- [Attend](https://engineperformanceexpo.com/attend/) - Watch the world's best performance engine expo online January 11-12, 2024 and learn from the top names in performance engine building. It's free!
- [Live](https://engineperformanceexpo.com/live/) - Expo 2024 Re-Watch Day 1 – January 11, 2024 Day 2 – January 12, 2024
- [Expo 2024 Show Schedule](https://engineperformanceexpo.com/attend/agenda/expo-2024-show-schedule/) - Expo 2024 January 11-12, 2024 Schedule of Events (Schedule is Tentative – Last updated: January 8, 2024) Day 1 Schedule | Day 2 Schedule Day 1 – January 11, 2024 – Click for Livestream (Expo begins at 10:00 AM Eastern / 7:00 AM Pacific / 3:00 PM GMT) Session Time Subject 10:00 AM Show open
- [Mini Series (Season 1 - 2021)](https://engineperformanceexpo.com/mini-series/mini-series-season-1-2021/) - Season 1 of the Engine Performance Expo aired live in January 2021 and features 34 episodes of engine builder interviews, how-tos and professional tips & tricks
- [Mini Series (Season 2 - 2022)](https://engineperformanceexpo.com/mini-series/mini-series-season-2/) - Season 2 of the Engine Performance Expo aired live in January and October 2022. It's 54 episodes of engine builder interviews, how-tos & professional tips
- [Mini Series (Season 3 - 2023)](https://engineperformanceexpo.com/mini-series/mini-series-season-3-2023/) - Engine Performance Expo Season 3 Aired live in January 2023 Expo 2023 – Episode 01 – Show Open: Danny Jesel Tribute & Fixing Fuel Pressure Gallery Expo 2023 – Episode 01 – Show Open: Danny Jesel Tribute & Fixing Fuel Pressure 2023, Featured Engine Build, Mini Series Expo 2023 – Episode 01 – Show Open:
- [Contact Us](https://engineperformanceexpo.com/contact-us/) - Have a question? Feel free to contact the Engine Performance Expo team using the form below. Name * Email * Tel Message * Submit
- [Expo 2023 Episodes](https://engineperformanceexpo.com/attend/agenda/) - The performance engine industry's best minds share their knowledge and secrets to building better engines -- 100% free! Watch now!
- [Sponsor](https://engineperformanceexpo.com/sponsor/) - Support the performance engine industry's premiere online education event and put your company in front of thousands of engine builders and racers worldwide.
- [Agenda 2022](https://engineperformanceexpo.com/attend/agenda/agenda-2022/) - Expo #2(2021 – 2022) Schedule of Events Each session appears as a new episode online weekly The October Agenda The January Agenda Day 1 Day 2 Day 3 Day 4 Day 1 – October 13, 2021 Time (EST / GMT -5) Subject 9:30 – 10:00AM Online Expo Center opens 10:00AM Watch → Welcome and Introduction
- [Speakers](https://engineperformanceexpo.com/attend/speakers/) - The performance engine industry's best share their knowledge at the world's leading online educational event for engine builders, racers, and enthusiasts
- [Attend International](https://engineperformanceexpo.com/attend/attend-international/) - International Attendees We have reports that some people have not been able to register via the main registration page because of errors in the telephone and postal code fields. If this happened to you, please use the adjacent form to register. [contact-form-7 id=”9723″ /]
- [Presenting Sponsor](https://engineperformanceexpo.com/sponsor/presenting-sponsor/) - Become a Presenting (Platinum Level) Sponsor at the Engine Performance Expo
- [News Updates](https://engineperformanceexpo.com/news-updates/) - 2404, 2025 Engine Performance Expo Live! 2025 Gallery Engine Performance Expo Live! 2025 News & Events Engine Performance Expo Live! 2025 admin2025-07-21T11:10:27-07:00April 24, 2025| The Engine Performance Expo returns in 2025 as an in-person event live from Rottler Mfg HQ in Kent, Washington July 16-18, 2025! Space is limited, register now! Read More 901, 2024
- [Post Expo Survey](https://engineperformanceexpo.com/post-expo-survey/) - Help Us Improve the Expo As a first-of-its-kind online expo, we had lots of hurdles to overcome to bring the Engine Performance Expo to you. We think we did a pretty good job, but we know there’s always room for improvement. Please help us make the next Expo better by completing this short survey and
- [Enter the Expo](https://engineperformanceexpo.com/enter/) - ENTER THE EXPO HERE The Expo is Now Available to Stream On-Demand Login with your email address To enter the expo, please enter your name and email. If you pre-registered, please make sure to use the same email address. Once you have successfully logged in to the expo the first time, you do not need
- [Tech Chips Sponsor](https://engineperformanceexpo.com/sponsor/tech-chips-sponsor/) - Become a Tech Chips (Gold) level sponsor at the Engine Performance Expo
- [Event Sponsor](https://engineperformanceexpo.com/sponsor/event-sponsor/) - Become an Event (Silver) level sponsor at the Engine Performance Expo
- [Web Sponsor](https://engineperformanceexpo.com/sponsor/web-sponsor/) - Complete the application to become a web-level sponsor of the Engine Performance Expo
- [Logos](https://engineperformanceexpo.com/sponsor/logos/) - Engine Performance Expo Image: Transparent .PNG Size: 2600px x 585px » Download (right click / save as) Rottler Logos Image: Transparent .PNG Size: 2600px x 1128px » Download (right click / save as) Image: Transparent .PNG Size: 2600px x 1128px » Download (right click / save as)

## Portfolio

- [Joe Petelle](https://engineperformanceexpo.com/Speakers/joe-petelle/) - Winston Cup legend and head of High Velocity Heads.
- [Don Mac Askill](https://engineperformanceexpo.com/Speakers/don-macaskill/) - After starting off racing at Saugus Speedway in Southern California, Don Mac Askill went on to become a chief mechanic and engine builder. Don’s methodical approach led him to join Jim Smith’s Ultra Motorsports team. Following his experience in NASCAR, Don moved back to Southern California and join Shaver Specialities Racing Engines. As dyno operator
- [Jon Kaase](https://engineperformanceexpo.com/Speakers/jon-kaase/) - Jon Kaase earned a degree in mechanical engineering, created race engines that won a dozen Pro Stock championships, succeeded in winning the Engine Masters Challenge eight times, and has presided over the company that bears his name for almost 39 years. A dentist’s son, Kaase, 67, started competing in drag racing while still at high
- [Lake Speed, Jr.](https://engineperformanceexpo.com/Speakers/lake-speed-jr/) - Lake Speed Jr. is the son of former NASCAR driver and team owner Lake Speed. A former crew member for Chad Knaus at Melling Racing, Speed joined the Joe Gibbs team in 2004 and led the creation of Joe Gibbs Driven Racing Oil. A member of STLE and SAE, Speed’s background in Tribology provides a
- [Mark Cronquist](https://engineperformanceexpo.com/Speakers/mark-cronquist/) - Mark Cronquist joined Joe Gibbs Racing in 1996 as an Assistant Engine builder. By 1998, Mark was promoted to Chief Engine Builder. In 14 race seasons under Mark’s leadership, he and his department built engines that won 88 Sprint Cup races, 74 Nationwide races, 3 Sprint Cup Championships, 1 Nationwide Championship and 3 Nationwide Owners
- [Paul "Scooter" Brothers](https://engineperformanceexpo.com/Speakers/paul-scooter-brothers/) - Since he was old enough to walk, Paul "Scooter" Brothers has been hanging around cars. His father was a mechanic his entire life and, as a result, Brothers was exposed to the wonderful world of automobiles at a very young age. Brothers said that he was given his nickname when he was a newborn. A
- [Ben Strader](https://engineperformanceexpo.com/Speakers/ben-strader/) - After spending nearly a decade working on performance engines and EFI systems, Ben Strader started the world’s first motorsports-based training academy—EFI University—in 2003. Over the last 17 years, the courses Ben has developed have taught close to 10,000 people in dozens of countries to build and tune high performance engines and fuel injection systems. He
- [Randy Neal](https://engineperformanceexpo.com/Speakers/randy-neal/) - For the last 50 years Randy has acquired a diverse knowledge of the Automotive Racing Industry. Starting in the cylinder head cleaning department and ultimately developing into a leader in the Designing and Manufacturing of Dynamic Balancing Machines. His direct association within the Racing Community has allowed him to develop proprietary software, machinery and application
- [John Callies](https://engineperformanceexpo.com/Speakers/john-callies/) - John Callies has been involved in the performance industry for over 53 years. After earning a degree in mechanical engineering, he worked for Pontiac Motor Division for 21 years; the last 12 years as manager of Pontiac Motor Sports. John left Pontiac and started Callies Crankshaft Co. Six years later he moved to help Joe
- [Joe Castello](https://engineperformanceexpo.com/Speakers/joe-castello/) - Joe works with the NHRA Camping World Drag Racing Series as a track announcer, social media host, and columnist for National Dragster magazine.
- [Ed Kiebler](https://engineperformanceexpo.com/Speakers/ed-kiebler/) - Ed Kiebler has been involved with the manufacture assembly and sales of Automotive Engine Remanufacturing equipment in one capacity or another for 46 years. He worked for Sunnen for 22 years, Storm Vulcan and Winona Van Norman for 10, and Rottler Manufacturing for the past 14 years. Of the 46 years in the industry 36
- [Brendan Melling](https://engineperformanceexpo.com/Speakers/brendan-melling/) - Brendan Melling started working at Melling when he was 15 in the shipping department and is now branching out to other roles in the family business. He will be going to Hope College to study business and play lacrosse next fall.
- [Jim Gray](https://engineperformanceexpo.com/Speakers/jim-gray/) - A racing engine machinist with over 25 years experience, Jim is currently the General Manager of Bullet Racing Engines. Jim has been machining and building all types of racing engines since he was a teen. From street performance to circle track and mountain Motor nitrous to billet blown methanol, his passion has always been in
- [Mike Osterhaus](https://engineperformanceexpo.com/Speakers/mike-osterhaus/) - Michael Osterhaus is a graduate of Iowa State University with a BS in mechanical engineering and holds the position of V.P. of Aftermarket Products with Melling. Mike’s background in automotive oil pumps began in 1988 with a Product Design Engineer position with Hoof Products in Maquoketa, Iowa. In that role he designed oil pumps and
- [Troy LaCrone](https://engineperformanceexpo.com/Speakers/troy-lacrone/) - Troy LaCrone had his first street race when he was 14 years old, 1984. He in his 1969 Camaro against what at that time was the fastest car in town. He won. Upon high school graduation, Troy enlisted in the US Army. He served for 5 years and is a highly decorated veteran that spent
- [Cale Risinger](https://engineperformanceexpo.com/Speakers/cale-risinger/) - Cale Risinger started his automotive career in the General Motors Automotive Service excellence program at Delta College in Saginaw MI. From there he spent 23 years working on the OEM side of the industry before starting his aftermarket career at Melling engine parts in 2017 as their Technical Manager. In this position Cale handled the
- [Mike Moran](https://engineperformanceexpo.com/Speakers/mike-moran/) - Pioneer Pro Street Drag racer Mike Moran creates performance products and has set many Street Car and Pro Mod records. Mike’s new 5,300hp all- billet engine is a new revolutionary design. His company, Moran Motorsports, is an expert in EFI systems and all forms of high-performance engines and has proven it time and again with
- [Chris Straub](https://engineperformanceexpo.com/Speakers/chris-straub/) - Chris Straub has spent decades developing relationships with performance companies that manufacture and distribute in our industry. These business allowed Chris to establish Straub Technologies in 2006 after working in the industry since 1989. Straub Tech was based on a simply philosophy, solve problems for customers with r the best in products, support, and price
- [Doug Yates](https://engineperformanceexpo.com/Speakers/doug-yates/) - Doug Yates has been around the sound of revving engines his entire life. You could say, it’s in his DNA. This comes as no surprise when you happen to be the son of legendary and NASCAR Hall of Fame engine builder and team owner Robert Yates. With a passion for stock car racing and making
- [Keith Jones](https://engineperformanceexpo.com/Speakers/keith-jones/) - Raised in the suburbs of Chicago, Keith Jones was fortunate to be the son of a gear head. Keith grew up at Arnie “The Farmer” Beswick’s shop, so a career in the automotive industry was only natural. Keith began working weekends and evenings at his uncle’s Union 76 gas station learning the basics of automotive
- [Billy Godbold](https://engineperformanceexpo.com/Speakers/billy-godbold/) - Throughout his tenure at COMP Cams, Billy has been heavily involved in an extremely diverse range of valve train design and development projects including variable valve timing applications, the Xtreme Energy, Thumpr, and XFI camshaft lines. His work for racing series including everything from NHRA, NASCAR, SCCA, GRAND-AM and IndyCar to sportsman and hobbyist ranks.
- [Ed Pink](https://engineperformanceexpo.com/Speakers/ed-pink/) - There is a good reason Ed Pink is known as The Old Master: The man’s command over automotive engineering is legendary and in a league of its own. Engines and high performance have been in his blood right from the start. He didn’t have his first car 24 hours before he had the engine out
- [Chuck Lynch](https://engineperformanceexpo.com/Speakers/chuck-lynch/) - Chuck Lynch has been in the profession of engine building for nearly 30 years. Chuck has built his knowledge working in the capacities of Engine Machinist, Process Engineer, Quality Auditor, Field Service Technician, Custom Trainer and his current daily capacity at Technical Specialist for the Engine Rebuilder’s Association.

## Fusion Elements

- [subscribe](https://engineperformanceexpo.com/fusion_element/subscribe/) - Subscribe for Updates Subscribe to our email newsletter to receive updates about Expo events, new video episodes and more! First Name *Last NameEmail Address *SubscribeGet Social
- [mini series footer](https://engineperformanceexpo.com/fusion_element/mini-series-footer/) - In the season 2 Expo opener, we go to EFI University to see Professor Ben Strader for a tutorial the calculations you need to get 1,000HP from a stock stroke
- [countdown](https://engineperformanceexpo.com/fusion_element/countdown/)
- [registration](https://engineperformanceexpo.com/fusion_element/registration/) - Expo #3 is Coming! January 13-14, 2023 The Engine Performance Expo provides unique information and know-how for high performance engine machinists, builders, and enthusiasts through training, education, community, supplier relations, and employment opportunities. The Engine Performance Expo is a global community focused at bettering the industry through open collaboration, mentoring, and transfer of knowledge to
- [4row attend](https://engineperformanceexpo.com/fusion_element/4row-attend/) - Support the performance engine industry's premiere online education event and put your company in front of thousands of engine builders and racers worldwide.
- [Sponsor Carousel](https://engineperformanceexpo.com/fusion_element/sponsor-carousel-2/) - The performance engine industry's best share their knowledge at the world's leading online educational event for engine builders, racers, and enthusiasts
- [Save the Date](https://engineperformanceexpo.com/fusion_element/save-the-date/)
- [agenda button](https://engineperformanceexpo.com/fusion_element/agenda-button/) - Attend the world's best online performance engine expo January 7-9, 2021 and learn from the top names in performance engine building. It's free!
- [Sponsor Levels](https://engineperformanceexpo.com/fusion_element/sponsor-levels/) - Sponsor Packages In the performance engine industry and want to get in front of thousands of engine builders and enthusiasts? A sponsorship in the Engine Performance Expo is the way to do it. Here are our sponsor packages. Web Sponsor$500Logo and link on websiteSocial media & Enews distributionLogo and link in ad rotation during broadcast
- [grand prize](https://engineperformanceexpo.com/fusion_element/grand-prize/) - Attend the world's best online performance engine expo January 7-9, 2021 and learn from the top names in performance engine building. It's free!
- [speaker button](https://engineperformanceexpo.com/fusion_element/speaker-button/) - See All Speakers
- [blogfooter](https://engineperformanceexpo.com/fusion_element/blogfooter/) - Learn More To see a full list of speakers, demonstrations, seminars and Q&A sessions, use the buttons below. For a complete list of sponsors, click here. See All Speakers See the Agenda Attend the Expo from your home, shop or wherever you want! Register to Attend for Free
- [sponsor carousel](https://engineperformanceexpo.com/fusion_element/sponsor-carousel/)
- [speakers](https://engineperformanceexpo.com/fusion_element/speakers/) - speakers Your opportunity to learn from the the leading professionals in the industry (Check back often for new speakers and updates) admin2021-06-17T15:33:16-07:00 Troy LaCrone Gallery Troy LaCrone Speakers Troy LaCroneTroy LaCrone had his first street race when he was 14 years old, 1984. He in his 1969 Camaro against what at that time was the

## Tags

- [performance engine](https://engineperformanceexpo.com/tag/performance-engine/)
- [engine performance expo 2021](https://engineperformanceexpo.com/tag/engine-performance-expo-2021/)
- [engine builders](https://engineperformanceexpo.com/tag/engine-builders/)
- [#cncporn #performanceengine #performanceengineexpo.](https://engineperformanceexpo.com/tag/cncporn-performanceengine-performanceengineexpo/)
- [#engineporn](https://engineperformanceexpo.com/tag/engineporn/)
- [speakers](https://engineperformanceexpo.com/tag/speakers/)
- [seminar](https://engineperformanceexpo.com/tag/seminar/)
- [day 3](https://engineperformanceexpo.com/tag/day-3/)
- [lifters](https://engineperformanceexpo.com/tag/lifters/)
- [morel](https://engineperformanceexpo.com/tag/morel/)
- [free](https://engineperformanceexpo.com/tag/free/)
- [drawing](https://engineperformanceexpo.com/tag/drawing/)
- [grudge](https://engineperformanceexpo.com/tag/grudge/)
- [no-prep- racing](https://engineperformanceexpo.com/tag/no-prep-racing/)
- [block machining](https://engineperformanceexpo.com/tag/block-machining/)
- [engine block](https://engineperformanceexpo.com/tag/engine-block/)
- [surface machining](https://engineperformanceexpo.com/tag/surface-machining/)
- [aera](https://engineperformanceexpo.com/tag/aera/)
- [Rottler](https://engineperformanceexpo.com/tag/rottler/)
- [mini series](https://engineperformanceexpo.com/tag/mini-series/)
- [video](https://engineperformanceexpo.com/tag/video/)
- [expo #1](https://engineperformanceexpo.com/tag/expo-1/)
- [roush yates engines](https://engineperformanceexpo.com/tag/roush-yates-engines/)
- [NASCAR](https://engineperformanceexpo.com/tag/nascar/)
- [engine builder](https://engineperformanceexpo.com/tag/engine-builder/)
- [moran motorsports](https://engineperformanceexpo.com/tag/moran-motorsports/)
- [honing](https://engineperformanceexpo.com/tag/honing/)
- [cylinder](https://engineperformanceexpo.com/tag/cylinder/)
- [surface finish](https://engineperformanceexpo.com/tag/surface-finish/)
- [cylinder honing](https://engineperformanceexpo.com/tag/cylinder-honing/)
- [rotating assembly](https://engineperformanceexpo.com/tag/rotating-assembly/)
- [balancing](https://engineperformanceexpo.com/tag/balancing/)
- [cwt industries](https://engineperformanceexpo.com/tag/cwt-industries/)
- [Q&A](https://engineperformanceexpo.com/tag/qa/)
- [registration](https://engineperformanceexpo.com/tag/registration/)
- [expo #2](https://engineperformanceexpo.com/tag/expo-2/)
- [october 2021](https://engineperformanceexpo.com/tag/october-2021/)
- [pistons](https://engineperformanceexpo.com/tag/pistons/)
- [wrist pins](https://engineperformanceexpo.com/tag/wrist-pins/)
- [cleaning](https://engineperformanceexpo.com/tag/cleaning/)
- [block cleaning](https://engineperformanceexpo.com/tag/block-cleaning/)
- [component cleaning](https://engineperformanceexpo.com/tag/component-cleaning/)
- [sponsor](https://engineperformanceexpo.com/tag/sponsor/)
- [promoto](https://engineperformanceexpo.com/tag/promoto/)
- [october show](https://engineperformanceexpo.com/tag/october-show/)
- [cnc](https://engineperformanceexpo.com/tag/cnc/)
- [custom parts](https://engineperformanceexpo.com/tag/custom-parts/)
- [straub technologies](https://engineperformanceexpo.com/tag/straub-technologies/)
- [warren johnson](https://engineperformanceexpo.com/tag/warren-johnson/)
- [cylinder head porting](https://engineperformanceexpo.com/tag/cylinder-head-porting/)
- [porting](https://engineperformanceexpo.com/tag/porting/)
- [5 axis cnc](https://engineperformanceexpo.com/tag/5-axis-cnc/)
- [valves](https://engineperformanceexpo.com/tag/valves/)
- [valve seats](https://engineperformanceexpo.com/tag/valve-seats/)
- [seats](https://engineperformanceexpo.com/tag/seats/)
- [guides](https://engineperformanceexpo.com/tag/guides/)
- [billy godbold](https://engineperformanceexpo.com/tag/billy-godbold/)
- [comp cams](https://engineperformanceexpo.com/tag/comp-cams/)
- [valvetrain](https://engineperformanceexpo.com/tag/valvetrain/)
- [camshaft](https://engineperformanceexpo.com/tag/camshaft/)
- [spintron](https://engineperformanceexpo.com/tag/spintron/)
- [efi university](https://engineperformanceexpo.com/tag/efi-university/)
- [ben strader](https://engineperformanceexpo.com/tag/ben-strader/)
- [testing](https://engineperformanceexpo.com/tag/testing/)
- [EFI](https://engineperformanceexpo.com/tag/efi/)
- [Carburetor](https://engineperformanceexpo.com/tag/carburetor/)
- [tips](https://engineperformanceexpo.com/tag/tips/)
- [no prep](https://engineperformanceexpo.com/tag/no-prep/)
- [mike moran](https://engineperformanceexpo.com/tag/mike-moran/)
- [turbocharger](https://engineperformanceexpo.com/tag/turbocharger/)
- [block sleeving](https://engineperformanceexpo.com/tag/block-sleeving/)
- [bes racing](https://engineperformanceexpo.com/tag/bes-racing/)
- [nitrous](https://engineperformanceexpo.com/tag/nitrous/)
- [john callies](https://engineperformanceexpo.com/tag/john-callies/)
- [lifter bushing](https://engineperformanceexpo.com/tag/lifter-bushing/)
- [pontiac](https://engineperformanceexpo.com/tag/pontiac/)
- [fiero](https://engineperformanceexpo.com/tag/fiero/)
- [indy](https://engineperformanceexpo.com/tag/indy/)
- [cass choate](https://engineperformanceexpo.com/tag/cass-choate/)
- [diesel](https://engineperformanceexpo.com/tag/diesel/)
- [jon kaase](https://engineperformanceexpo.com/tag/jon-kaase/)
- [DIY](https://engineperformanceexpo.com/tag/diy/)
- [total seal](https://engineperformanceexpo.com/tag/total-seal/)
- [dyno testing](https://engineperformanceexpo.com/tag/dyno-testing/)
- [ring end gap](https://engineperformanceexpo.com/tag/ring-end-gap/)
- [dyno](https://engineperformanceexpo.com/tag/dyno/)
- [carburator](https://engineperformanceexpo.com/tag/carburator/)
- [Holley](https://engineperformanceexpo.com/tag/holley/)
- [tool hack](https://engineperformanceexpo.com/tag/tool-hack/)
- [engine performance expo best of](https://engineperformanceexpo.com/tag/engine-performance-expo-best-of/)
- [stroke](https://engineperformanceexpo.com/tag/stroke/)
- [boost](https://engineperformanceexpo.com/tag/boost/)
- [horsepower](https://engineperformanceexpo.com/tag/horsepower/)
- [CNC Blockworks](https://engineperformanceexpo.com/tag/cnc-blockworks/)
- [ed liebler](https://engineperformanceexpo.com/tag/ed-liebler/)
- [aign bore](https://engineperformanceexpo.com/tag/aign-bore/)
- [f69a](https://engineperformanceexpo.com/tag/f69a/)
- [chuck lynch](https://engineperformanceexpo.com/tag/chuck-lynch/)
- [john calles](https://engineperformanceexpo.com/tag/john-calles/)
- [roller lifter](https://engineperformanceexpo.com/tag/roller-lifter/)
- [advance tech](https://engineperformanceexpo.com/tag/advance-tech/)
- [black mamba](https://engineperformanceexpo.com/tag/black-mamba/)
- [engine shop](https://engineperformanceexpo.com/tag/engine-shop/)
- [small business](https://engineperformanceexpo.com/tag/small-business/)
- [business segment](https://engineperformanceexpo.com/tag/business-segment/)
- [chris straub](https://engineperformanceexpo.com/tag/chris-straub/)
- [roy johnson](https://engineperformanceexpo.com/tag/roy-johnson/)
- [nhra](https://engineperformanceexpo.com/tag/nhra/)
- [drag racing](https://engineperformanceexpo.com/tag/drag-racing/)
- [speeds](https://engineperformanceexpo.com/tag/speeds/)
- [feeds](https://engineperformanceexpo.com/tag/feeds/)
- [grind](https://engineperformanceexpo.com/tag/grind/)
- [sleeving](https://engineperformanceexpo.com/tag/sleeving/)
- [finish](https://engineperformanceexpo.com/tag/finish/)
- [engine finish](https://engineperformanceexpo.com/tag/engine-finish/)
- [block finish](https://engineperformanceexpo.com/tag/block-finish/)
- [rem finish](https://engineperformanceexpo.com/tag/rem-finish/)
- [socal](https://engineperformanceexpo.com/tag/socal/)
- [shaver](https://engineperformanceexpo.com/tag/shaver/)
- [duramax](https://engineperformanceexpo.com/tag/duramax/)
- [block work](https://engineperformanceexpo.com/tag/block-work/)
- [cncn blockworks](https://engineperformanceexpo.com/tag/cncn-blockworks/)
- [ls machining](https://engineperformanceexpo.com/tag/ls-machining/)
- [ls block work](https://engineperformanceexpo.com/tag/ls-block-work/)
- [career](https://engineperformanceexpo.com/tag/career/)
- [trade school](https://engineperformanceexpo.com/tag/trade-school/)
- [vocational](https://engineperformanceexpo.com/tag/vocational/)
- [engine building](https://engineperformanceexpo.com/tag/engine-building/)
- [samtech](https://engineperformanceexpo.com/tag/samtech/)
- [hone](https://engineperformanceexpo.com/tag/hone/)
- [boring](https://engineperformanceexpo.com/tag/boring/)
- [bore](https://engineperformanceexpo.com/tag/bore/)
- [ring](https://engineperformanceexpo.com/tag/ring/)
- [ring seal](https://engineperformanceexpo.com/tag/ring-seal/)
- [balance](https://engineperformanceexpo.com/tag/balance/)
- [crankshaft](https://engineperformanceexpo.com/tag/crankshaft/)
- [engine performance](https://engineperformanceexpo.com/tag/engine-performance/)
- [engine balance](https://engineperformanceexpo.com/tag/engine-balance/)
- [scooter brothers](https://engineperformanceexpo.com/tag/scooter-brothers/)
- [business](https://engineperformanceexpo.com/tag/business/)
- [racing industry](https://engineperformanceexpo.com/tag/racing-industry/)
- [hidden horsepower](https://engineperformanceexpo.com/tag/hidden-horsepower/)
- [driven racing oils](https://engineperformanceexpo.com/tag/driven-racing-oils/)
- [COM Cams](https://engineperformanceexpo.com/tag/com-cams/)
- [interview](https://engineperformanceexpo.com/tag/interview/)
- [business operations](https://engineperformanceexpo.com/tag/business-operations/)
- [machine shop](https://engineperformanceexpo.com/tag/machine-shop/)
- [automation](https://engineperformanceexpo.com/tag/automation/)
- [profitability](https://engineperformanceexpo.com/tag/profitability/)
- [george bryce](https://engineperformanceexpo.com/tag/george-bryce/)
- [motorcycle](https://engineperformanceexpo.com/tag/motorcycle/)
- [nhra pro stock](https://engineperformanceexpo.com/tag/nhra-pro-stock/)
- [pro stock](https://engineperformanceexpo.com/tag/pro-stock/)
- [tim wilkerson](https://engineperformanceexpo.com/tag/tim-wilkerson/)
- [top fuel](https://engineperformanceexpo.com/tag/top-fuel/)
- [aluminum block](https://engineperformanceexpo.com/tag/aluminum-block/)
- [welding](https://engineperformanceexpo.com/tag/welding/)
- [engine bearings](https://engineperformanceexpo.com/tag/engine-bearings/)
- [bearings](https://engineperformanceexpo.com/tag/bearings/)
- [mahle](https://engineperformanceexpo.com/tag/mahle/)
- [dan begle](https://engineperformanceexpo.com/tag/dan-begle/)
- [powerstroke](https://engineperformanceexpo.com/tag/powerstroke/)
- [7.3](https://engineperformanceexpo.com/tag/7-3/)
- [6.0](https://engineperformanceexpo.com/tag/6-0/)
- [6.4](https://engineperformanceexpo.com/tag/6-4/)
- [choate performance engineering](https://engineperformanceexpo.com/tag/choate-performance-engineering/)
- [diesel doctor](https://engineperformanceexpo.com/tag/diesel-doctor/)
- [rountable](https://engineperformanceexpo.com/tag/rountable/)
- [business strategy](https://engineperformanceexpo.com/tag/business-strategy/)
- [pandemic](https://engineperformanceexpo.com/tag/pandemic/)
- [business issue](https://engineperformanceexpo.com/tag/business-issue/)
- [just in time](https://engineperformanceexpo.com/tag/just-in-time/)
- [manufacturing](https://engineperformanceexpo.com/tag/manufacturing/)
- [association](https://engineperformanceexpo.com/tag/association/)
- [career development](https://engineperformanceexpo.com/tag/career-development/)
- [learing](https://engineperformanceexpo.com/tag/learing/)
- [nitro](https://engineperformanceexpo.com/tag/nitro/)
- [funny car](https://engineperformanceexpo.com/tag/funny-car/)
- [Charles Navarro](https://engineperformanceexpo.com/tag/charles-navarro/)
- [Randy Neal](https://engineperformanceexpo.com/tag/randy-neal/)
- [roundatble](https://engineperformanceexpo.com/tag/roundatble/)
- [discussion](https://engineperformanceexpo.com/tag/discussion/)
- [career path](https://engineperformanceexpo.com/tag/career-path/)
- [cylinder heads](https://engineperformanceexpo.com/tag/cylinder-heads/)
- [heads](https://engineperformanceexpo.com/tag/heads/)
- [fuel](https://engineperformanceexpo.com/tag/fuel/)
- [100hp](https://engineperformanceexpo.com/tag/100hp/)
- [racing fuel](https://engineperformanceexpo.com/tag/racing-fuel/)
- [head porting](https://engineperformanceexpo.com/tag/head-porting/)
- [cylinder head](https://engineperformanceexpo.com/tag/cylinder-head/)
- [seats and guides](https://engineperformanceexpo.com/tag/seats-and-guides/)
- [seat cutting](https://engineperformanceexpo.com/tag/seat-cutting/)
- [guide cutting](https://engineperformanceexpo.com/tag/guide-cutting/)
- [block assembly](https://engineperformanceexpo.com/tag/block-assembly/)
- [short block](https://engineperformanceexpo.com/tag/short-block/)
- [ls block](https://engineperformanceexpo.com/tag/ls-block/)
- [boosted](https://engineperformanceexpo.com/tag/boosted/)
- [jimmy barton](https://engineperformanceexpo.com/tag/jimmy-barton/)
- [roush yates racing engines](https://engineperformanceexpo.com/tag/roush-yates-racing-engines/)
- [microscope](https://engineperformanceexpo.com/tag/microscope/)
- [inspection](https://engineperformanceexpo.com/tag/inspection/)
- [reverse blueprinting](https://engineperformanceexpo.com/tag/reverse-blueprinting/)
- [qmp racing](https://engineperformanceexpo.com/tag/qmp-racing/)
- [piston measuring](https://engineperformanceexpo.com/tag/piston-measuring/)
- [tools](https://engineperformanceexpo.com/tag/tools/)
- [mc-1](https://engineperformanceexpo.com/tag/mc-1/)
- [keith dorton](https://engineperformanceexpo.com/tag/keith-dorton/)
- [driven racing oil](https://engineperformanceexpo.com/tag/driven-racing-oil/)
- [motor oil](https://engineperformanceexpo.com/tag/motor-oil/)
- [measuring](https://engineperformanceexpo.com/tag/measuring/)
- [measurement](https://engineperformanceexpo.com/tag/measurement/)
- [pushrods](https://engineperformanceexpo.com/tag/pushrods/)
- [rocker arm](https://engineperformanceexpo.com/tag/rocker-arm/)
- [featured engine build](https://engineperformanceexpo.com/tag/featured-engine-build/)
- [#engine](https://engineperformanceexpo.com/tag/engine/)
- [#enginetechnology](https://engineperformanceexpo.com/tag/enginetechnology/)
- [featured engine](https://engineperformanceexpo.com/tag/featured-engine/)
- [engine testing](https://engineperformanceexpo.com/tag/engine-testing/)
- [roundtable](https://engineperformanceexpo.com/tag/roundtable/)
- [expo](https://engineperformanceexpo.com/tag/expo/)
- [disccusion](https://engineperformanceexpo.com/tag/disccusion/)
- [LS](https://engineperformanceexpo.com/tag/ls/)
- [electronic fuel injection](https://engineperformanceexpo.com/tag/electronic-fuel-injection/)
- [break-in](https://engineperformanceexpo.com/tag/break-in/)
- [diagnostics](https://engineperformanceexpo.com/tag/diagnostics/)
- [godbold engineering](https://engineperformanceexpo.com/tag/godbold-engineering/)
- [cams](https://engineperformanceexpo.com/tag/cams/)
- [foggit](https://engineperformanceexpo.com/tag/foggit/)
- [technology](https://engineperformanceexpo.com/tag/technology/)
- [vic hill](https://engineperformanceexpo.com/tag/vic-hill/)
- [vichill engines](https://engineperformanceexpo.com/tag/vichill-engines/)
- [dirt racing](https://engineperformanceexpo.com/tag/dirt-racing/)
- [late model](https://engineperformanceexpo.com/tag/late-model/)
- [cross hatch](https://engineperformanceexpo.com/tag/cross-hatch/)
- [machining](https://engineperformanceexpo.com/tag/machining/)
- [kieth jones](https://engineperformanceexpo.com/tag/kieth-jones/)
- [profilometer](https://engineperformanceexpo.com/tag/profilometer/)
- [setup](https://engineperformanceexpo.com/tag/setup/)
- [parts](https://engineperformanceexpo.com/tag/parts/)
- [supply shortages](https://engineperformanceexpo.com/tag/supply-shortages/)
- [improvise](https://engineperformanceexpo.com/tag/improvise/)
- [adapt](https://engineperformanceexpo.com/tag/adapt/)
- [overcome](https://engineperformanceexpo.com/tag/overcome/)
- [boosed engine](https://engineperformanceexpo.com/tag/boosed-engine/)
- [LS engine](https://engineperformanceexpo.com/tag/ls-engine/)
- [1](https://engineperformanceexpo.com/tag/1/)
- [000HP](https://engineperformanceexpo.com/tag/000hp/)
- [BES](https://engineperformanceexpo.com/tag/bes/)
- [Tony Bischoff](https://engineperformanceexpo.com/tag/tony-bischoff/)
- [education](https://engineperformanceexpo.com/tag/education/)
- [race team](https://engineperformanceexpo.com/tag/race-team/)
- [skills](https://engineperformanceexpo.com/tag/skills/)
- [gary stinnett](https://engineperformanceexpo.com/tag/gary-stinnett/)
- [pay it forward](https://engineperformanceexpo.com/tag/pay-it-forward/)
- [expo 2023](https://engineperformanceexpo.com/tag/expo-2023/)
- [day 1](https://engineperformanceexpo.com/tag/day-1/)
- [full day](https://engineperformanceexpo.com/tag/full-day/)
- [day 2](https://engineperformanceexpo.com/tag/day-2/)
- [fuel pressure](https://engineperformanceexpo.com/tag/fuel-pressure/)
- [pressure regulator](https://engineperformanceexpo.com/tag/pressure-regulator/)
- [danny jesel](https://engineperformanceexpo.com/tag/danny-jesel/)
- [12846 ERL](https://engineperformanceexpo.com/tag/12846-erl/)
- [star racing](https://engineperformanceexpo.com/tag/star-racing/)
- [tuning](https://engineperformanceexpo.com/tag/tuning/)
- [tuning by ear](https://engineperformanceexpo.com/tag/tuning-by-ear/)
- [tuning performance](https://engineperformanceexpo.com/tag/tuning-performance/)
- [leak down testing](https://engineperformanceexpo.com/tag/leak-down-testing/)
- [cylinder pressure](https://engineperformanceexpo.com/tag/cylinder-pressure/)
- [boosted engine](https://engineperformanceexpo.com/tag/boosted-engine/)
- [jason line](https://engineperformanceexpo.com/tag/jason-line/)
- [lack of speed jr.](https://engineperformanceexpo.com/tag/lack-of-speed-jr/)
- [hidden horsepower podcast](https://engineperformanceexpo.com/tag/hidden-horsepower-podcast/)
- [endoscope](https://engineperformanceexpo.com/tag/endoscope/)
- [used oil analysis](https://engineperformanceexpo.com/tag/used-oil-analysis/)
- [shop services](https://engineperformanceexpo.com/tag/shop-services/)
- [borescope](https://engineperformanceexpo.com/tag/borescope/)
- [manifold](https://engineperformanceexpo.com/tag/manifold/)
- [mahlegroup](https://engineperformanceexpo.com/tag/mahlegroup/)
- [port matching](https://engineperformanceexpo.com/tag/port-matching/)
- [dynomometer](https://engineperformanceexpo.com/tag/dynomometer/)
- [troubleshooting](https://engineperformanceexpo.com/tag/troubleshooting/)
- [master class](https://engineperformanceexpo.com/tag/master-class/)
- [intake](https://engineperformanceexpo.com/tag/intake/)
- [RPM](https://engineperformanceexpo.com/tag/rpm/)
- [engine troubleshooting](https://engineperformanceexpo.com/tag/engine-troubleshooting/)
- [loss of power](https://engineperformanceexpo.com/tag/loss-of-power/)
- [valvetrain stiffness](https://engineperformanceexpo.com/tag/valvetrain-stiffness/)
- [spring](https://engineperformanceexpo.com/tag/spring/)
- [system test](https://engineperformanceexpo.com/tag/system-test/)
- [engine hack](https://engineperformanceexpo.com/tag/engine-hack/)
- [tech tips](https://engineperformanceexpo.com/tag/tech-tips/)
- [rockers](https://engineperformanceexpo.com/tag/rockers/)
- [springs](https://engineperformanceexpo.com/tag/springs/)
- [corrosion](https://engineperformanceexpo.com/tag/corrosion/)
- [rust](https://engineperformanceexpo.com/tag/rust/)
- [oxidation](https://engineperformanceexpo.com/tag/oxidation/)
- [engine care](https://engineperformanceexpo.com/tag/engine-care/)
- [fogging spray](https://engineperformanceexpo.com/tag/fogging-spray/)
- [cluth](https://engineperformanceexpo.com/tag/cluth/)
- [economy](https://engineperformanceexpo.com/tag/economy/)
- [business environment](https://engineperformanceexpo.com/tag/business-environment/)
- [indsutry growth](https://engineperformanceexpo.com/tag/indsutry-growth/)
- [roaring 20s](https://engineperformanceexpo.com/tag/roaring-20s/)
- [hold my beer](https://engineperformanceexpo.com/tag/hold-my-beer/)
- [ring gap](https://engineperformanceexpo.com/tag/ring-gap/)
- [end gap](https://engineperformanceexpo.com/tag/end-gap/)
- [engine development](https://engineperformanceexpo.com/tag/engine-development/)
- [compeitiion engines](https://engineperformanceexpo.com/tag/compeitiion-engines/)
- [ultrasonic](https://engineperformanceexpo.com/tag/ultrasonic/)
- [cleaning tech](https://engineperformanceexpo.com/tag/cleaning-tech/)
- [cleaning tools](https://engineperformanceexpo.com/tag/cleaning-tools/)
- [engine assembly](https://engineperformanceexpo.com/tag/engine-assembly/)
- [best practices](https://engineperformanceexpo.com/tag/best-practices/)
- [performanceengine](https://engineperformanceexpo.com/tag/performanceengine/)
- [enginebuilder](https://engineperformanceexpo.com/tag/enginebuilder/)
- [totalseal](https://engineperformanceexpo.com/tag/totalseal/)
- [kbtitan](https://engineperformanceexpo.com/tag/kbtitan/)
- [block honing](https://engineperformanceexpo.com/tag/block-honing/)
- [morel lifters](https://engineperformanceexpo.com/tag/morel-lifters/)
- [award](https://engineperformanceexpo.com/tag/award/)
- [lifetime achievement award](https://engineperformanceexpo.com/tag/lifetime-achievement-award/)
- [tear down](https://engineperformanceexpo.com/tag/tear-down/)
- [engine disassembly](https://engineperformanceexpo.com/tag/engine-disassembly/)
- [hall of fame](https://engineperformanceexpo.com/tag/hall-of-fame/)
- [winner](https://engineperformanceexpo.com/tag/winner/)
- [engine building pioneers](https://engineperformanceexpo.com/tag/engine-building-pioneers/)
- [em45](https://engineperformanceexpo.com/tag/em45/)
- [rottler em series](https://engineperformanceexpo.com/tag/rottler-em-series/)
- [rottler cnc](https://engineperformanceexpo.com/tag/rottler-cnc/)
- [engine machining](https://engineperformanceexpo.com/tag/engine-machining/)
- [bearing failure](https://engineperformanceexpo.com/tag/bearing-failure/)
- [failure analysis](https://engineperformanceexpo.com/tag/failure-analysis/)
- [dominator405](https://engineperformanceexpo.com/tag/dominator405/)
- [joe woods](https://engineperformanceexpo.com/tag/joe-woods/)
- [street outlaws](https://engineperformanceexpo.com/tag/street-outlaws/)
- [dominator](https://engineperformanceexpo.com/tag/dominator/)
- [dampening](https://engineperformanceexpo.com/tag/dampening/)
- [damper](https://engineperformanceexpo.com/tag/damper/)
- [EVs](https://engineperformanceexpo.com/tag/evs/)
- [electric vehicles](https://engineperformanceexpo.com/tag/electric-vehicles/)
- [hydrogen vechicles](https://engineperformanceexpo.com/tag/hydrogen-vechicles/)
- [engine technology](https://engineperformanceexpo.com/tag/engine-technology/)
- [future](https://engineperformanceexpo.com/tag/future/)
- [internal combustion](https://engineperformanceexpo.com/tag/internal-combustion/)
- [gas engine](https://engineperformanceexpo.com/tag/gas-engine/)
- [gas vehicles](https://engineperformanceexpo.com/tag/gas-vehicles/)
- [training](https://engineperformanceexpo.com/tag/training/)
- [expo engine](https://engineperformanceexpo.com/tag/expo-engine/)
- [in-cylinder combustion](https://engineperformanceexpo.com/tag/in-cylinder-combustion/)
- [combustion analysis](https://engineperformanceexpo.com/tag/combustion-analysis/)
- [tune-up](https://engineperformanceexpo.com/tag/tune-up/)
- [torque](https://engineperformanceexpo.com/tag/torque/)
- [power vs pressure](https://engineperformanceexpo.com/tag/power-vs-pressure/)
- [clamp load](https://engineperformanceexpo.com/tag/clamp-load/)
- [bore geometry](https://engineperformanceexpo.com/tag/bore-geometry/)
- [cylinder geometry](https://engineperformanceexpo.com/tag/cylinder-geometry/)
- [tech 101](https://engineperformanceexpo.com/tag/tech-101/)
- [factory stock](https://engineperformanceexpo.com/tag/factory-stock/)
- [stanfield racing engines](https://engineperformanceexpo.com/tag/stanfield-racing-engines/)
- [bolt](https://engineperformanceexpo.com/tag/bolt/)
- [stretch](https://engineperformanceexpo.com/tag/stretch/)
- [torque-to-yield](https://engineperformanceexpo.com/tag/torque-to-yield/)
- [stress vs strain](https://engineperformanceexpo.com/tag/stress-vs-strain/)
- [studs](https://engineperformanceexpo.com/tag/studs/)
- [fasteners](https://engineperformanceexpo.com/tag/fasteners/)
- [high performance](https://engineperformanceexpo.com/tag/high-performance/)
- [P1](https://engineperformanceexpo.com/tag/p1/)
- [gaskets](https://engineperformanceexpo.com/tag/gaskets/)
- [mls gasket](https://engineperformanceexpo.com/tag/mls-gasket/)
- [skidless profilometer](https://engineperformanceexpo.com/tag/skidless-profilometer/)
- [cylinders](https://engineperformanceexpo.com/tag/cylinders/)
- [cylinder surface](https://engineperformanceexpo.com/tag/cylinder-surface/)
- [roughness](https://engineperformanceexpo.com/tag/roughness/)
- [software](https://engineperformanceexpo.com/tag/software/)
- [cylinder finish](https://engineperformanceexpo.com/tag/cylinder-finish/)
- [cylinder wall](https://engineperformanceexpo.com/tag/cylinder-wall/)
- [mahle aftermarket](https://engineperformanceexpo.com/tag/mahle-aftermarket/)
- [f series bearingsa](https://engineperformanceexpo.com/tag/f-series-bearingsa/)
- [h series bearings](https://engineperformanceexpo.com/tag/h-series-bearings/)
- [steve morris](https://engineperformanceexpo.com/tag/steve-morris/)
- [engine builder interview](https://engineperformanceexpo.com/tag/engine-builder-interview/)
- [1000HP+](https://engineperformanceexpo.com/tag/1000hp/)
- [crank](https://engineperformanceexpo.com/tag/crank/)
- [crankshaft repair](https://engineperformanceexpo.com/tag/crankshaft-repair/)
- [racing cranks](https://engineperformanceexpo.com/tag/racing-cranks/)
- [rods](https://engineperformanceexpo.com/tag/rods/)
- [piston](https://engineperformanceexpo.com/tag/piston/)
- [bullet piston](https://engineperformanceexpo.com/tag/bullet-piston/)
- [bullet rod](https://engineperformanceexpo.com/tag/bullet-rod/)
- [cylinder wear](https://engineperformanceexpo.com/tag/cylinder-wear/)
- [crosshatch](https://engineperformanceexpo.com/tag/crosshatch/)
- [friction](https://engineperformanceexpo.com/tag/friction/)
- [wear testing](https://engineperformanceexpo.com/tag/wear-testing/)
- [father and son](https://engineperformanceexpo.com/tag/father-and-son/)
- [family racing team](https://engineperformanceexpo.com/tag/family-racing-team/)
- [getm performance](https://engineperformanceexpo.com/tag/getm-performance/)
- [billet carburator](https://engineperformanceexpo.com/tag/billet-carburator/)
- [performance fuel systems](https://engineperformanceexpo.com/tag/performance-fuel-systems/)
- [fuel system](https://engineperformanceexpo.com/tag/fuel-system/)
- [sumabore](https://engineperformanceexpo.com/tag/sumabore/)
- [plasma spray bore](https://engineperformanceexpo.com/tag/plasma-spray-bore/)
- [chevy small block](https://engineperformanceexpo.com/tag/chevy-small-block/)
- [small block](https://engineperformanceexpo.com/tag/small-block/)
- [mayhem](https://engineperformanceexpo.com/tag/mayhem/)
- [VEPR](https://engineperformanceexpo.com/tag/vepr/)
- [700HP](https://engineperformanceexpo.com/tag/700hp/)
- [18 degrees](https://engineperformanceexpo.com/tag/18-degrees/)
- [oil level](https://engineperformanceexpo.com/tag/oil-level/)
- [oil](https://engineperformanceexpo.com/tag/oil/)
- [lubrication](https://engineperformanceexpo.com/tag/lubrication/)
- [dyno test](https://engineperformanceexpo.com/tag/dyno-test/)
- [peak horsepower](https://engineperformanceexpo.com/tag/peak-horsepower/)
- [oil testing](https://engineperformanceexpo.com/tag/oil-testing/)
- [porche](https://engineperformanceexpo.com/tag/porche/)
- [piston coating](https://engineperformanceexpo.com/tag/piston-coating/)
- [cylinder bore](https://engineperformanceexpo.com/tag/cylinder-bore/)
- [jobs](https://engineperformanceexpo.com/tag/jobs/)
- [employmnet](https://engineperformanceexpo.com/tag/employmnet/)
- [aprenticeship](https://engineperformanceexpo.com/tag/aprenticeship/)
- [motorsports industry](https://engineperformanceexpo.com/tag/motorsports-industry/)
- [passion](https://engineperformanceexpo.com/tag/passion/)
- [head hands heart](https://engineperformanceexpo.com/tag/head-hands-heart/)
- [rocker arms](https://engineperformanceexpo.com/tag/rocker-arms/)
- [system stiffnes](https://engineperformanceexpo.com/tag/system-stiffnes/)
- [lake speed](https://engineperformanceexpo.com/tag/lake-speed/)
- [engine re-build](https://engineperformanceexpo.com/tag/engine-re-build/)
- [Ford C3](https://engineperformanceexpo.com/tag/ford-c3/)
- [lifter](https://engineperformanceexpo.com/tag/lifter/)
- [bushing](https://engineperformanceexpo.com/tag/bushing/)
- [needle bearing](https://engineperformanceexpo.com/tag/needle-bearing/)
- [busing bearing](https://engineperformanceexpo.com/tag/busing-bearing/)
- [keyed lifter](https://engineperformanceexpo.com/tag/keyed-lifter/)
- [more horsepower](https://engineperformanceexpo.com/tag/more-horsepower/)
- [tech](https://engineperformanceexpo.com/tag/tech/)
- [hydrogen combustion](https://engineperformanceexpo.com/tag/hydrogen-combustion/)
- [materials](https://engineperformanceexpo.com/tag/materials/)
- [coatings](https://engineperformanceexpo.com/tag/coatings/)
- [future of engines](https://engineperformanceexpo.com/tag/future-of-engines/)
- [checy ls](https://engineperformanceexpo.com/tag/checy-ls/)
- [ls short block](https://engineperformanceexpo.com/tag/ls-short-block/)
- [max boost](https://engineperformanceexpo.com/tag/max-boost/)
- [competition](https://engineperformanceexpo.com/tag/competition/)
- [racer mentality](https://engineperformanceexpo.com/tag/racer-mentality/)
- [coopetition](https://engineperformanceexpo.com/tag/coopetition/)
- [race every day](https://engineperformanceexpo.com/tag/race-every-day/)
- [dart heads](https://engineperformanceexpo.com/tag/dart-heads/)
- [bore coating](https://engineperformanceexpo.com/tag/bore-coating/)
- [block deck](https://engineperformanceexpo.com/tag/block-deck/)
- [cnc machining](https://engineperformanceexpo.com/tag/cnc-machining/)
- [rottler F69A](https://engineperformanceexpo.com/tag/rottler-f69a/)
- [block boring](https://engineperformanceexpo.com/tag/block-boring/)
- [block seal](https://engineperformanceexpo.com/tag/block-seal/)
- [waviness](https://engineperformanceexpo.com/tag/waviness/)
- [engine tech](https://engineperformanceexpo.com/tag/engine-tech/)
- [how to](https://engineperformanceexpo.com/tag/how-to/)
- [roushyates](https://engineperformanceexpo.com/tag/roushyates/)
- [balancing tech](https://engineperformanceexpo.com/tag/balancing-tech/)
- [crank balancing](https://engineperformanceexpo.com/tag/crank-balancing/)
- [diamond pistons](https://engineperformanceexpo.com/tag/diamond-pistons/)
- [diamond racing](https://engineperformanceexpo.com/tag/diamond-racing/)
- [pins](https://engineperformanceexpo.com/tag/pins/)
- [piston clearance](https://engineperformanceexpo.com/tag/piston-clearance/)
- [cylinder coating](https://engineperformanceexpo.com/tag/cylinder-coating/)
- [piston head](https://engineperformanceexpo.com/tag/piston-head/)
- [skirt](https://engineperformanceexpo.com/tag/skirt/)
- [engine components](https://engineperformanceexpo.com/tag/engine-components/)
- [engine parts](https://engineperformanceexpo.com/tag/engine-parts/)
- [ultrasonic cleaning](https://engineperformanceexpo.com/tag/ultrasonic-cleaning/)
- [engine cleaning](https://engineperformanceexpo.com/tag/engine-cleaning/)
- [parts cleaning](https://engineperformanceexpo.com/tag/parts-cleaning/)
- [oil pump](https://engineperformanceexpo.com/tag/oil-pump/)
- [oil pan](https://engineperformanceexpo.com/tag/oil-pan/)
- [oil filter](https://engineperformanceexpo.com/tag/oil-filter/)
- [oil pans](https://engineperformanceexpo.com/tag/oil-pans/)
- [oil pumps](https://engineperformanceexpo.com/tag/oil-pumps/)
- [engine lubrication](https://engineperformanceexpo.com/tag/engine-lubrication/)
- [melling engine parts](https://engineperformanceexpo.com/tag/melling-engine-parts/)
- [racing oil](https://engineperformanceexpo.com/tag/racing-oil/)
- [rottler 69a](https://engineperformanceexpo.com/tag/rottler-69a/)
- [custom crankshaft profile](https://engineperformanceexpo.com/tag/custom-crankshaft-profile/)
- [blower manifold](https://engineperformanceexpo.com/tag/blower-manifold/)
- [porting how-to](https://engineperformanceexpo.com/tag/porting-how-to/)
- [CNC porting](https://engineperformanceexpo.com/tag/cnc-porting/)
- [porting demo](https://engineperformanceexpo.com/tag/porting-demo/)
- [ed pink](https://engineperformanceexpo.com/tag/ed-pink/)
- [ed pink racing engines](https://engineperformanceexpo.com/tag/ed-pink-racing-engines/)
- [the old master](https://engineperformanceexpo.com/tag/the-old-master/)
- [off the cuff](https://engineperformanceexpo.com/tag/off-the-cuff/)
- [improvising](https://engineperformanceexpo.com/tag/improvising/)
- [valve guides](https://engineperformanceexpo.com/tag/valve-guides/)
- [Valve Springs](https://engineperformanceexpo.com/tag/valve-springs/)
- [simulator](https://engineperformanceexpo.com/tag/simulator/)
- [fuel injection](https://engineperformanceexpo.com/tag/fuel-injection/)
- [carb](https://engineperformanceexpo.com/tag/carb/)
- [the 3 rs](https://engineperformanceexpo.com/tag/the-3-rs/)
- [blue madness 2.0](https://engineperformanceexpo.com/tag/blue-madness-2-0/)
- [shop tour](https://engineperformanceexpo.com/tag/shop-tour/)
- [turb](https://engineperformanceexpo.com/tag/turb/)
- [turbochargers](https://engineperformanceexpo.com/tag/turbochargers/)
- [block sleeve](https://engineperformanceexpo.com/tag/block-sleeve/)
- [block](https://engineperformanceexpo.com/tag/block/)
- [nitrous oxide](https://engineperformanceexpo.com/tag/nitrous-oxide/)
- [Musi](https://engineperformanceexpo.com/tag/musi/)
- [racing engines](https://engineperformanceexpo.com/tag/racing-engines/)
- [keyed lifters](https://engineperformanceexpo.com/tag/keyed-lifters/)
- [lifter bore](https://engineperformanceexpo.com/tag/lifter-bore/)
- [keyway bore](https://engineperformanceexpo.com/tag/keyway-bore/)
- [lifter installation](https://engineperformanceexpo.com/tag/lifter-installation/)
- [#keyedlifters](https://engineperformanceexpo.com/tag/keyedlifters/)
- [#keywaybore](https://engineperformanceexpo.com/tag/keywaybore/)
- [#lifterbore](https://engineperformanceexpo.com/tag/lifterbore/)
- [#lifterbushing](https://engineperformanceexpo.com/tag/lifterbushing/)
- [#lifterinstallation](https://engineperformanceexpo.com/tag/lifterinstallation/)
- [pontiac fiero](https://engineperformanceexpo.com/tag/pontiac-fiero/)
- [pace car](https://engineperformanceexpo.com/tag/pace-car/)
- [performance diesel](https://engineperformanceexpo.com/tag/performance-diesel/)
- [jon kaase racing](https://engineperformanceexpo.com/tag/jon-kaase-racing/)
- [engine tools](https://engineperformanceexpo.com/tag/engine-tools/)
- [hacks](https://engineperformanceexpo.com/tag/hacks/)
- [tricks](https://engineperformanceexpo.com/tag/tricks/)
- [jon kaase racing engines](https://engineperformanceexpo.com/tag/jon-kaase-racing-engines/)
- [piston ring](https://engineperformanceexpo.com/tag/piston-ring/)
- [oil ring](https://engineperformanceexpo.com/tag/oil-ring/)
- [end gap tools](https://engineperformanceexpo.com/tag/end-gap-tools/)
- [cummins](https://engineperformanceexpo.com/tag/cummins/)
- [choate](https://engineperformanceexpo.com/tag/choate/)
- [epexpo](https://engineperformanceexpo.com/tag/epexpo/)
- [engineperformance](https://engineperformanceexpo.com/tag/engineperformance/)
- [engine diagnostics](https://engineperformanceexpo.com/tag/engine-diagnostics/)
- [dyno Don Mac Askill](https://engineperformanceexpo.com/tag/dyno-don-mac-askill/)
- [attend](https://engineperformanceexpo.com/tag/attend/)
- [engine expo](https://engineperformanceexpo.com/tag/engine-expo/)
- [in person](https://engineperformanceexpo.com/tag/in-person/)
- [livestream](https://engineperformanceexpo.com/tag/livestream/)
- [free expo admission](https://engineperformanceexpo.com/tag/free-expo-admission/)
- [ask the expert](https://engineperformanceexpo.com/tag/ask-the-expert/)
- [epexpo2021](https://engineperformanceexpo.com/tag/epexpo2021/)
- [kasse](https://engineperformanceexpo.com/tag/kasse/)
- [carbide](https://engineperformanceexpo.com/tag/carbide/)
- [grinding](https://engineperformanceexpo.com/tag/grinding/)
- [inserts](https://engineperformanceexpo.com/tag/inserts/)
- [engine builder careers](https://engineperformanceexpo.com/tag/engine-builder-careers/)
- [business opportinuties](https://engineperformanceexpo.com/tag/business-opportinuties/)
- [epexo 2024 HOF](https://engineperformanceexpo.com/tag/epexo-2024-hof/)
- [engine builder awards](https://engineperformanceexpo.com/tag/engine-builder-awards/)
- [performance engine builders](https://engineperformanceexpo.com/tag/performance-engine-builders/)
- [performance engine awards](https://engineperformanceexpo.com/tag/performance-engine-awards/)
- [epexpo2024](https://engineperformanceexpo.com/tag/epexpo2024/)
- [#nhrasuperstreet](https://engineperformanceexpo.com/tag/nhrasuperstreet/)
- [#cylinderrepair](https://engineperformanceexpo.com/tag/cylinderrepair/)
- [#tipsandtricks](https://engineperformanceexpo.com/tag/tipsandtricks/)
- [classes](https://engineperformanceexpo.com/tag/classes/)
- [speeds and feeds](https://engineperformanceexpo.com/tag/speeds-and-feeds/)
- [dieselengine](https://engineperformanceexpo.com/tag/dieselengine/)
- [performancediesel](https://engineperformanceexpo.com/tag/performancediesel/)
- [airflow](https://engineperformanceexpo.com/tag/airflow/)
- [engine design](https://engineperformanceexpo.com/tag/engine-design/)
- [business advice](https://engineperformanceexpo.com/tag/business-advice/)
- [airflowsystem](https://engineperformanceexpo.com/tag/airflowsystem/)
- [manifoldrunner](https://engineperformanceexpo.com/tag/manifoldrunner/)
- [enginepower](https://engineperformanceexpo.com/tag/enginepower/)
- [fordgodzilla](https://engineperformanceexpo.com/tag/fordgodzilla/)
- [godzillaengine](https://engineperformanceexpo.com/tag/godzillaengine/)
- [flat tappet](https://engineperformanceexpo.com/tag/flat-tappet/)
- [roller cam](https://engineperformanceexpo.com/tag/roller-cam/)
- [tractorracing](https://engineperformanceexpo.com/tag/tractorracing/)
- [diesel trucks](https://engineperformanceexpo.com/tag/diesel-trucks/)
- [powerstrokediesel](https://engineperformanceexpo.com/tag/powerstrokediesel/)
- [dieselengine engine](https://engineperformanceexpo.com/tag/dieselengine-engine/)
- [machineshop](https://engineperformanceexpo.com/tag/machineshop/)
- [cncmachine](https://engineperformanceexpo.com/tag/cncmachine/)
- [measure manage manipulate](https://engineperformanceexpo.com/tag/measure-manage-manipulate/)
- [blowby](https://engineperformanceexpo.com/tag/blowby/)
- [blow by meter](https://engineperformanceexpo.com/tag/blow-by-meter/)
- [roughness vs waviness](https://engineperformanceexpo.com/tag/roughness-vs-waviness/)
- [metallurgy](https://engineperformanceexpo.com/tag/metallurgy/)
- [measurment](https://engineperformanceexpo.com/tag/measurment/)
- [camshafts](https://engineperformanceexpo.com/tag/camshafts/)
- [prostock](https://engineperformanceexpo.com/tag/prostock/)
- [camero](https://engineperformanceexpo.com/tag/camero/)
- [cannedheat](https://engineperformanceexpo.com/tag/cannedheat/)
- [nhradragracing](https://engineperformanceexpo.com/tag/nhradragracing/)
- [legendary](https://engineperformanceexpo.com/tag/legendary/)
- [prostocklegend](https://engineperformanceexpo.com/tag/prostocklegend/)
- [surfacefinishing](https://engineperformanceexpo.com/tag/surfacefinishing/)
- [surfacefinish](https://engineperformanceexpo.com/tag/surfacefinish/)
- [balancingmachine](https://engineperformanceexpo.com/tag/balancingmachine/)
- [ed winfield](https://engineperformanceexpo.com/tag/ed-winfield/)
- [harry miller](https://engineperformanceexpo.com/tag/harry-miller/)
- [vic edelbrock](https://engineperformanceexpo.com/tag/vic-edelbrock/)
- [ed isky](https://engineperformanceexpo.com/tag/ed-isky/)
- [engine builder hall of fame](https://engineperformanceexpo.com/tag/engine-builder-hall-of-fame/)
- [dos and donts](https://engineperformanceexpo.com/tag/dos-and-donts/)
- [gear shop](https://engineperformanceexpo.com/tag/gear-shop/)
- [performance allstars](https://engineperformanceexpo.com/tag/performance-allstars/)
- [Lake Speed Sr](https://engineperformanceexpo.com/tag/lake-speed-sr/)
- [NHRA super stock](https://engineperformanceexpo.com/tag/nhra-super-stock/)
- [hemi](https://engineperformanceexpo.com/tag/hemi/)
- [dodge hemi](https://engineperformanceexpo.com/tag/dodge-hemi/)
- [Chevrolet](https://engineperformanceexpo.com/tag/chevrolet/)
- [Chevy](https://engineperformanceexpo.com/tag/chevy/)
- [R07](https://engineperformanceexpo.com/tag/r07/)
- [line bore](https://engineperformanceexpo.com/tag/line-bore/)
- [main caps](https://engineperformanceexpo.com/tag/main-caps/)
- [align bore](https://engineperformanceexpo.com/tag/align-bore/)
- [careers](https://engineperformanceexpo.com/tag/careers/)
- [straight and round](https://engineperformanceexpo.com/tag/straight-and-round/)
- [alignment](https://engineperformanceexpo.com/tag/alignment/)
- [tooling](https://engineperformanceexpo.com/tag/tooling/)
- [diesel engine](https://engineperformanceexpo.com/tag/diesel-engine/)
- [Power Stroke](https://engineperformanceexpo.com/tag/power-stroke/)
- [heavy duty](https://engineperformanceexpo.com/tag/heavy-duty/)
- [Oil analysis](https://engineperformanceexpo.com/tag/oil-analysis/)
- [viscosity](https://engineperformanceexpo.com/tag/viscosity/)
- [engine wear](https://engineperformanceexpo.com/tag/engine-wear/)
- [science not speculation](https://engineperformanceexpo.com/tag/science-not-speculation/)
- [Surface roughness](https://engineperformanceexpo.com/tag/surface-roughness/)
- [deck surface](https://engineperformanceexpo.com/tag/deck-surface/)
- [head gasket](https://engineperformanceexpo.com/tag/head-gasket/)
- [gasket seal](https://engineperformanceexpo.com/tag/gasket-seal/)
- [JLine Performance Products](https://engineperformanceexpo.com/tag/jline-performance-products/)
- [hemi block](https://engineperformanceexpo.com/tag/hemi-block/)
- [Jason line pro stock](https://engineperformanceexpo.com/tag/jason-line-pro-stock/)
- [Timing](https://engineperformanceexpo.com/tag/timing/)
- [timing components](https://engineperformanceexpo.com/tag/timing-components/)
- [timing chain](https://engineperformanceexpo.com/tag/timing-chain/)
- [bobweight](https://engineperformanceexpo.com/tag/bobweight/)
- [balancing machine](https://engineperformanceexpo.com/tag/balancing-machine/)
- [sparkplugwires](https://engineperformanceexpo.com/tag/sparkplugwires/)
- [scottperformancewire](https://engineperformanceexpo.com/tag/scottperformancewire/)
- [busch series](https://engineperformanceexpo.com/tag/busch-series/)
- [cnc machine](https://engineperformanceexpo.com/tag/cnc-machine/)
- [business profit](https://engineperformanceexpo.com/tag/business-profit/)
- [business 101](https://engineperformanceexpo.com/tag/business-101/)
- [auto shop](https://engineperformanceexpo.com/tag/auto-shop/)
- [data driven](https://engineperformanceexpo.com/tag/data-driven/)
- [physics](https://engineperformanceexpo.com/tag/physics/)
- [more power](https://engineperformanceexpo.com/tag/more-power/)
- [halloffame](https://engineperformanceexpo.com/tag/halloffame/)
- [enginebuilderhalloffame](https://engineperformanceexpo.com/tag/enginebuilderhalloffame/)
- [Holman & Moody](https://engineperformanceexpo.com/tag/holman-moody/)
- [Bob Glidden](https://engineperformanceexpo.com/tag/bob-glidden/)
- [John Lingenfelter](https://engineperformanceexpo.com/tag/john-lingenfelter/)
- [lifter bushings](https://engineperformanceexpo.com/tag/lifter-bushings/)
- [lifter indexing](https://engineperformanceexpo.com/tag/lifter-indexing/)
- [engine building career](https://engineperformanceexpo.com/tag/engine-building-career/)
- [Cylinder surface finish](https://engineperformanceexpo.com/tag/cylinder-surface-finish/)
- [cylinder hone](https://engineperformanceexpo.com/tag/cylinder-hone/)
- [project Pontiac](https://engineperformanceexpo.com/tag/project-pontiac/)
- [Pontiac block](https://engineperformanceexpo.com/tag/pontiac-block/)
- [next generation](https://engineperformanceexpo.com/tag/next-generation/)
- [power gain](https://engineperformanceexpo.com/tag/power-gain/)
- [engine build](https://engineperformanceexpo.com/tag/engine-build/)
- [blow by](https://engineperformanceexpo.com/tag/blow-by/)
- [racingvalves](https://engineperformanceexpo.com/tag/racingvalves/)
- [tng](https://engineperformanceexpo.com/tag/tng/)
- [thats a wrap](https://engineperformanceexpo.com/tag/thats-a-wrap/)
- [expo2024](https://engineperformanceexpo.com/tag/expo2024/)
- [epe2024](https://engineperformanceexpo.com/tag/epe2024/)
- [epe 2025](https://engineperformanceexpo.com/tag/epe-2025/)
- [expo 5](https://engineperformanceexpo.com/tag/expo-5/)
- [engineperformanceexpo](https://engineperformanceexpo.com/tag/engineperformanceexpo/)
- [2025](https://engineperformanceexpo.com/tag/2025/)
- [RaceEngines](https://engineperformanceexpo.com/tag/raceengines/)
- [CylinderHeads](https://engineperformanceexpo.com/tag/cylinderheads/)
- [ManifoldDesign](https://engineperformanceexpo.com/tag/manifolddesign/)
- [EngineTech](https://engineperformanceexpo.com/tag/enginetech/)
- [EngineBuilding](https://engineperformanceexpo.com/tag/enginebuilding/)
- [CylinderHead](https://engineperformanceexpo.com/tag/cylinderhead/)
- [RaceEngine](https://engineperformanceexpo.com/tag/raceengine/)
- [DarinMorgan](https://engineperformanceexpo.com/tag/darinmorgan/)
- [AutomotiveEngineering](https://engineperformanceexpo.com/tag/automotiveengineering/)
- [EngineTuning](https://engineperformanceexpo.com/tag/enginetuning/)
- [PistonRings](https://engineperformanceexpo.com/tag/pistonrings/)
- [RacingEngines](https://engineperformanceexpo.com/tag/racingengines/)
- [GasketSealing](https://engineperformanceexpo.com/tag/gasketsealing/)
- [Metrology](https://engineperformanceexpo.com/tag/metrology/)
- [AutomotiveMachining](https://engineperformanceexpo.com/tag/automotivemachining/)
- [MarkMalburg](https://engineperformanceexpo.com/tag/markmalburg/)
- [CrankshaftBalancing](https://engineperformanceexpo.com/tag/crankshaftbalancing/)
- [EngineHarmonics](https://engineperformanceexpo.com/tag/engineharmonics/)
- [TorsionalVibration](https://engineperformanceexpo.com/tag/torsionalvibration/)
- [EngineDurability](https://engineperformanceexpo.com/tag/enginedurability/)
- [ParasiticLoss](https://engineperformanceexpo.com/tag/parasiticloss/)
- [HarmonicDamper](https://engineperformanceexpo.com/tag/harmonicdamper/)
- [RandyNeal](https://engineperformanceexpo.com/tag/randyneal/)

## Portfolio Categories

- [Speakers](https://engineperformanceexpo.com/portfolio_category/speakers/) - Engine Performance Expo Speakers
- [Speakers-Expo2](https://engineperformanceexpo.com/portfolio_category/speakers-2/) - Speakers and personalities appearing at the October 2021 Expo

## Portfolio Tags

- [nascar](https://engineperformanceexpo.com/portfolio_tags/nascar/)
- [joe petelle](https://engineperformanceexpo.com/portfolio_tags/joe-petelle/)
- [HVH](https://engineperformanceexpo.com/portfolio_tags/hvh/)